H8SLASH3003 datasheet(69/715 Pages) RENESAS

69 / 715 page

2.8.4 Exception-Handling Sequences

Reset Exception Handling: Reset exception handling has the highest priority. The reset state is

entered when the

RES signal goes low. Reset exception handling starts after that, when RES

changes from low to high. When reset exception handling starts the CPU fetches a start address

from the exception vector table and starts program execution from that address. All interrupts,

including NMI, are disabled during the reset exception-handling sequence and immediately after it

ends.

Interrupt Exception Handling and Trap Instruction Exception Handling: When these

exception-handling sequences begin, the CPU references the stack pointer (ER7) and pushes the

program counter and condition code register on the stack. Next, if the UE bit in the system control

is cleared to 0, the CPU sets both the I bit and the UI bit in the condition code register to 1. Then

the CPU fetches a start address from the exception vector table and execution branches to that

address.

Figure 2-14 shows the stack after the exception-handling sequence.

Figure 2-14 Stack Structure after Exception Handling

SP–4

SP–3

SP–2

SP–1

SP (ER7)

Before exception

handling starts

SP (ER7)

SP+1

SP+2

SP+3

SP+4

After exception

handling ends

Stack area

CCR

Even

address

Pushed on stack

Legend

CCR:

SP:

Condition code register

Stack pointer

Notes: 1.

PC is the address of the first instruction executed after the return from the

exception-handling routine.

Registers must be saved and restored by word access or longword access,

starting at an even address.

H8/3003 数据表(PDF) 69 Page - Renesas Technology Corp

H8/3003 数据表(HTML) 69 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载