H8SLASH3003 datasheet(232/715 Pages) RENESAS

232 / 715 page

8.4.7 DMAC Activation

The DMAC can be activated by an internal interrupt, external request, or auto-request. The

available activation sources differ depending on the transfer mode and channel as indicated in

table 8-11.

Table 8-11 DMAC Activation Sources

Short Address Mode

Channels

Activation Source

0A and 1A 0B and 1B

2A and 3A 2B and 3B

Normal

Block

IMIA0

IMIA1

IMIA2

IMIA3

TXI0

××

RXI0

××

TXI1

××

RXI1

××

External

Falling edge

requests

DREQ

Low input at

DREQ

Auto-request

××

Activation by Internal Interrupts: When an interrupt request is selected as a DMAC activation

source and the DTE bit is set to 1, that interrupt request is not sent to the CPU. It is not possible

for an interrupt request to activate the DMAC and simultaneously generate a CPU interrupt.

When the DMAC is activated by an interrupt request, the interrupt request flag is cleared

automatically. If the same interrupt is selected to activate two or more channels, the interrupt

request flag is cleared when the highest-priority channel is activated, but the transfer request is

held pending on the other channels in the DMAC, which are activated in their priority order.

Full Address

Mode

Internal

interrupts

214

H8/3003 数据表(PDF) 232 Page - Renesas Technology Corp

H8/3003 数据表(HTML) 232 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载