H8SLASH3028F datasheet(361/923 Pages) RENESAS

361 / 923 page

Rev. 2.00, 09/03, page 331 of 890

9.2.9

Timer Control Registers (16TCR)

16TCR is an 8-bit register. The 16-bit timer has three 16TCRs, one in each channel.

Channel

Abbreviation

Function

16TCR0

16TCR1

16TCR2

16TCR controls the timer counter. The 16TCRs in all

channels are functionally identical. When phase counting

mode is selected in channel 2, the settings of bits CKEG1

and CKEG0 and TPSC2 to TPSC0 in 16TCR2 are ignored.

Bit

Initial value

Read/Write

—

CCLR1

R/W

CCLR0

R/W

CKEG1

R/W

CKEG0

R/W

TPSC0

R/W

TPSC2

R/W

TPSC1

R/W

Timer prescaler 2 to 0

These bits select the timer

counter clock

Reserved bit

Clock edge 1/0

These bits select external clock edges

Counter clear 1/0

These bits select the counter clear source

Each 16TCR is an 8-bit readable/writable register that selects the timer counter clock source,

selects the edge or edges of external clock sources, and selects how the counter is cleared.

16TCR is initialized to H'80 by a reset and in standby mode.

Bit 7—Reserved: This bit cannot be modified and is always read as 1.

H8/3028F 数据表(PDF) 361 Page - Renesas Technology Corp

H8/3028F 数据表(HTML) 361 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载