3UG3501 datasheet(13/114 Pages) ETC2

13 / 114 page

SIMOCODE 3UF Motor Management and Control Devices

7/13

Siemens LV 1 T · 2006

SIMOCODE pro 3UF7

motor management and control devices

Diagnostic data

• Numerous detailed early warning and fault messages (can

also be used for further processing in the device or I&C

system)

• Internal device fault logging with time stamp

• Value of the previous tripping current

• Checkback error (e.g. no current flow in the main circuit

following ON control command) etc.

Autonomous operation

An essential feature of SIMOCODE pro is independent

execution of all protection and control functions even if

communication with the I&C system breaks down. If the bus or

automation system fails, the full functionality of the feeder is

ensured or a pre-defined response can be initiated, e.g. the

feeder can be shut down in a controlled manner or certain

configured control mechanisms can be performed (e.g. the

direction of rotation can be reversed).

■Integration

General

In addition to device function and hardware design, a great deal

of emphasis is placed on the case of communication-capable

controlgear on the user-friendliness of the configuration software

and the ability of the system to be integrated easily into various

different system configurations and process automation sys-

tems. For this reason, the SIMOCODE pro system provides suit-

able software tools for consistent, time-saving parameterization,

configuration and diagnostics:

• SIMOCODE ES for totally integrated startup and service

• OM SIMOCODE pro object manager for total integration into

SIMATIC S7

• PCS 7 function block library SIMOCODE pro for total

integration into PCS 7

SIMOCODE ES

The parameterization software for SIMOCODE pro can be run on

a PC/PG under Windows 2000 or Windows XP. It is available in

two functionally graded versions:

• SIMOCODE ES Smart, for direct connection to

SIMOCODE pro via the system interface on the device

(point-to-point)

• SIMOCODE ES Professional, for connection to one or

several devices over PROFIBUS DP or point-to-point through

the system interface

With SIMOCODE ES, the SIMOCODE motor management sys-

tem provides a user-friendly and clear-cut user interface with

which to configure, operate, monitor and test SIMOCODE pro in

the field or from a central location. By displaying all operating,

service and diagnostics data, SIMOCODE ES supplies impor-

tant information on whether maintenance work is required or, in

the event of a fault, helps to prevent faults or to localize and rec-

tify them once they have occurred.

Unnecessary plant downtimes can be prevented by changing

parameters online (even during operation). The flexible printing

function integrated into SIMOCODE ES allows comprehensive

documentation of all parameters or partial documentation of

selected or changed parameters.

• SIMOCODE ES Graphic is an optional software package for

SIMOCODE ES Smart or SIMOCODE ES Professional. It

expands the user interface with a graphical editor and

supports extremely user-friendly parameterization with Drag &

Drop. Inputs and outputs of function blocks can be graphically

linked and parameters can be set. The configured functions

can be described in greater detail using comments and the

device parameterization can be documented graphically –

this speeds up start-up and simplifies the plant

documentation.

Note:

Installation of SIMOCODE ES Graphic requires at least one

installed version of SIMOCODE ES Smart 2004+SP1 or

SIMOCODE ES Professional+SP1 (from April 2005) on the

PC/PG.

OM SIMOCODE pro object manager

(as part of SIMOCODE ES Professional)

The OM SIMOCODE pro object manager is a standard

component of SIMOCODE ES Professional. In contrast to a

conventional GSD file, it enables SIMOCODE ES to be

integrated into STEP 7 for convenient device parameterization.

By installing SIMOCODE ES Professional and

OM SIMOCODE pro on a PC/PG, which is used to configure the

hardware of the SIMATIC S7, SIMOCODE ES Professional can

be called directly from the hardware configuration. This allows

easy and consistent S7 configuration.

PCS 7 function block library for SIMOCODE pro

The SIMOCODE pro PCS 7 library can be used for simple and

easy integration of SIMOCODE pro into the SIMATIC PCS 7 V6

process control system. The SIMOCODE pro PCS 7 function

block library contains the diagnostic and driver blocks

corresponding with the diagnostic and driver concept of

SIMATIC PCS 7 as well as the elements (symbols and faceplate)

required for operator control and process monitoring. The

application is integrated by graphic interconnection using the

CFC Editor.

The technological and signal processing functions of the

SIMOCODE pro PCS 7 function block library are based on the

SIMATIC PCS 7 standard libraries (driver blocks, technological

blocks) and are optimally tailored to SIMOCODE pro. Users who

previously configured motor feeder circuits using conventional

technology by means of signal blocks and motor or valve blocks,

can now easily switch to the SIMOCODE pro PCS 7 function

block library.

The SIMOCODE pro PCS 7 function block library supplied on

CD-ROM allows the user to run the required engineering

software on the engineering station (single license) including the

runtime software for executing the AS blocks in an automation

system (single license). If the AS blocks are to be used in

additional automation systems, the corresponding number of

runtime licenses are required which are supplied without a data

carrier.

System manual for SIMOCODE pro

The SIMOCODE pro system manual describes the motor

management system and its functions in detail. It contains

information about configuration and commissioning as well as

servicing and maintenance. A typical example of a reversing

starter application is used to teach the user quickly and

practically how to use the system. In addition to help on how to

identify and rectify faults in the event of a malfunction, the

manual also contains special information for servicing and

maintenance.

Furthermore, the manual contains schematics, dimensional

drawings and technical specifications of the system

components as configuring aids.

3UG3501 数据表(PDF) 13 Page - List of Unclassifed Manufacturers

3UG3501 数据表(HTML) 13 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载