3UG3501 datasheet(8/114 Pages) ETC2

8 / 114 page

SIMOCODE 3UF Motor Management and Control Devices

SIMOCODE pro 3UF7

motor management and control devices

7/8

Siemens LV 1 T · 2006

Operator panel

The operator panel is used to control the motor feeder and can

replace all conventional pushbuttons and indicator lights to save

space. This means that SIMOCODE pro or the feeder can be

operated directly at the control cabinet and that the system

interface is connected externally for easier parameterization or

diagnostics using a PC/PG, for example.

The operator panel is connected to the basic unit over a

connection cable from its rear system interface and is supplied

electrically from the basic unit.

The operator panel has 5 freely assignable buttons and a total of

10 LEDs, of which 7 LEDs can be used as required and

assigned to any status signal.

A PC/PG can be connected to the front system interface over the

PC cable.

The operator panel is mounted in the control cabinet door or the

front plate of, for example, a withdrawable unit and satisfies IP54

degree of protection with the system interface covered.

Operator panel for SIMOCODE pro

•10 LEDs

• Labeling strips

• Test/reset button

• 4 control keys

• 2 system interfaces on the front with interface covers

Expansion modules for additional I/Os and functions

With basic unit 2 (SIMOCODE pro V), it is possible to expand the

number and type of inputs and outputs in order to implement

additional functions, for example. Each expansion module has

two system interfaces on the front. Through the one system

interface the expansion module is connected to the system

interface of basic unit 2 using a connection cable, for example;

through the second system interface, further expansion modules

or the operator panel can be connected. The power supply for

the expansion modules is provided by the connection cable

through basic unit 2.

All expansion modules are suitable for rail mounting or can be

directly fixed to a mounting plate using additional plug-in lugs.

Basic unit 2 can be extended on the whole with up to 5

expansion modules.

Expansion with additional binary I/Os through digital

modules

Up to two digital modules can be used to add additional binary

inputs and relay outputs to basic unit 2. The input circuits of the

digital modules are supplied from an external power supply. The

following variants are available:

• 4 inputs, supplied externally with 24 V DC and 2 monostable

relay outputs

• 4 inputs, supplied externally with 110 ... 240 V AC/DC and 2

monostable relay outputs

• 4 inputs, supplied externally with 24 V DC and 2 bistable

relay outputs

• 4 inputs, supplied externally with 110 ... 240 V AC/DC and 2

bistable relay outputs

Up to two digital modules can be connected to one basic unit 2.

All variants can be combined with each other.

3UF7 300-1AB00-0 (left) and 3UF7 300-1AU00-0 (right) digital modules

4 binary inputs, externally supplied with

•24 V DC or

• 110 ... 240 V AC/DC

2 relay outputs,

• monostable or

• bistable (the switching status of the relay outputs is also

maintained following failure of the supply voltage on basic

unit 2)

1 Ready LED

2 system interfaces for connection

• to basic unit 2

• of expansion modules

• of a current measuring module or current/voltage measuring

module

• of an operator panel

Note:

For the implementation of some motor control functions, in

addition to the relay outputs on basic unit 2, at least one further

digital module is required.

3UG3501 数据表(PDF) 8 Page - List of Unclassifed Manufacturers

3UG3501 数据表(HTML) 8 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载