3UG3501 datasheet(5/114 Pages) ETC2

5 / 114 page

SIMOCODE 3UF Motor Management and Control Devices

7/5

Siemens LV 1 T · 2006

SIMOCODE pro 3UF7

motor management and control devices

■Overview

SIMOCODE pro is a flexible, modular motor management sys-

tem for motors with constant speeds in the low-voltage perfor-

mance range. It optimizes the connection between I&C and

motor feeder, increases plant availability and allows significant

savings to be made for startup, operation and maintenance of a

system.

When SIMOCODE pro is installed in the low-voltage switchgear

cabinet, it is the intelligent interface between the higher-level

automation system and the motor feeder and includes the

following:

• Multifunctional, solid-state full motor protection which is

independent of the automation system

• Flexible software instead of hardware for the motor control

• Detailed operational, service and diagnostics data

• Open communication through PROFIBUS DP, the standard for

fieldbus systems

■Design

General

SIMOCODE pro is a modularly constructed motor management

system which is subdivided into two device series with different

functional scopes:

• SIMOCODE pro C

• SIMOCODE pro V

Both series (systems) are made up of different hardware

components (modules):

Per feeder each system always comprises one basic unit and

one separate current measuring module. The two modules are

connected together electrically through the system interface

with a connection cable and can be mounted mechanically

connected as a unit (one behind the other) or separately (side

by side). The motor current to be monitored is decisive only for

the choice of current measuring module.

An operator panel for mounting in the control cabinet door is

optionally connectable through a second system interface on

the basic unit. Both the current measurement module and the

operator panel are electrically supplied by the basic unit through

the connection cable. More inputs, outputs and functions can be

added to basic unit 2 (SIMOCODE pro V) by means of optional

expansion modules, thus supplementing the inputs and outputs

already existing on the basic unit.

All modules are connected together by connection cables.

The connection cables are available in various lengths. The

maximum distance between the modules (e.g. between the

basic unit and the current measurement module) must not

exceed 2 m. The total length of all the connection cables in a

single system must not be more than 3 m.

SIMOCODE pro designed for mixed operation

Depending on functional requirements, the two systems can be

used simultaneously without any problems and without any addi-

tional outlay in a low-voltage system. SIMOCODE pro C is fully

upward-compatible to SIMOCODE pro V. The same compo-

nents are used. The parameterization of SIMOCODE pro C can

be transferred without any problems. Both systems have the

same removable terminals and the same terminal designations.

System

SIMOCODE pro C

SIMOCODE pro V

Modules

• Basic unit 1

• Basic unit 2

• Current measuring module

• Current measuring module or

current/voltage measuring

voltage

• Operator panel (optional)

• Expansion modules

(optional)

3UG3501 数据表(PDF) 5 Page - List of Unclassifed Manufacturers

3UG3501 数据表(HTML) 5 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载