| 数据搜索系统,热门电子元器件搜索 |
|
LSM6DB0 数据表(PDF) 25 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LSM6DB0 数据表(HTML) 25 Page - STMicroelectronics |
|
25 / 66 page ![]() DocID025603 Rev 1 25/66 LSM6DB0 Accelerometer and gyroscope functionality 66 7 Accelerometer and gyroscope functionality 7.1 Multiple reads (burst) When only the accelerometer is activated and the gyroscope is in power down, starting from OUT_X_XL (28h - 29h) multiple reads can be performed. Once OUT_Z_XL (2Ch - 2Dh) is read, the system automatically restarts from OUT_X_XL (28h - 29h) (see Figure 7). Figure 7. Multiple reads: accelerometer only When both accelerometer and gyroscope sensors are activated at the same ODR, starting from OUT_X_G (18h - 19h) multiple reads can be performed. Once OUT_Z_XL (2Ch - 2Dh) is read, the system automatically restarts from OUT_X_G (18h - 19h) (see Figure 8). Figure 8. Multiple reads: accelerometer and gyroscope 7.2 FIFO The LSM6DB0 embeds a 32 slots of 16-bit data FIFO for each of the gyroscope’s three output channels, yaw, pitch and roll, and 16-bit data FIFO for each of the accelerometer’s three output channels, X, Y and Z. This allows consistent power saving for the system, since the host processor does not need to continuously poll data from the sensor, but it can wake up only when needed and burst the significant data out from the FIFO. This buffer can work accordingly to five different modes: Bypass mode, FIFO-mode, Continuous mode, Continuous-to-FIFO mode and Bypass-to-Continuous. Each mode is selected by the FMODE [2:0] bits in the FIFO_CTRL (2Eh) register. Programmable FIFO threshold status, FIFO overrun events and the number of unread samples stored are available in the FIFO_SRC (2Fh) register and can be set to generate dedicated interrupts on the INT1 pin using the INT1_CTRL (0Ch) register. x,y,z OUT_Z_XL Read #1 (2C-2D) (2A-2B) OUT_Y_XL (28-29) OUT_X_XL x,y,z Read #n OUT_Z_XL (2C-2D) (2A-2B) OUT_Y_XL (28-29) OUT_X_XL (15-16) OUT_TEMP x,y,z OUT_Z_XL Read #1 (2C-2D) (2A-2B) OUT_Y_XL (28-29) OUT_X_XL x,y,z Read #n OUT_Z_G (1C-1D) (1A-1B) OUT_Y_G (18-19) OUT_X_G OUT_Z_XL (2C-2D) (2A-2B) OUT_Y_XL (28-29) OUT_X_XL OUT_Z_G (1C-1D) (1A-1B) OUT_Y_G (18-19) OUT_X_G (15-16) OUT_TEMP |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |