HMC1197LP7FE datasheet(12/57 Pages) AD

12 / 57 page

For price, delivery, and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC1197LP7FE

v03.0314

Wideband direct Quadrature Modulator

w/ Fractional-n Pll & Vco, 100 - 4000 MHz

table 6. absolute Maximum ratings

VCC1, VCC2, VCC3, VDDLS,

VDDCP, BIAS, IF1P, EN_MOD

-0.3V to +5.5V

V3, DVDD, RVDD, VCCPD,

VCCPS, VCCHF

-0.3V to +3.6V

Baseband Input Voltage (AC + DC)

(Reference to GND)

-0.3V to + 1.3V

Junction Temperature

150°C

Thermal Resistance (R

th)

(junction to ground paddle)

4.5 °C/W

Storage Temperature

-65 to +150 °C

Operating Temperature

-40 to +85 °C

ESD Sensitivity (HBM)

outline drawing

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

NOTES:

1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA

AND SILICON IMPREGNATED.

2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.

3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.

4. DIMENSIONS ARE IN INCHES [MILLIMETERS].

5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

6. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, WHITE INK, OR LASER MARK

LOCATED APPROX. AS SHOWN.

7. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.25mm

MAX.

8. PACKAGE WARP SHALL NOT EXCEED 0.05mm

9. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF

GROUND.

10. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.

Part Number

Package Body Material

Lead Finish

MSL Rating

Package Marking [2]

HMC1197LP7FE

RoHS-compliant Low Stress Injection Molded Plastic

100% matte Sn

MSL1

[1]

H1197

XXXX

[1] Max peak reflow temperature of 260 °C

[2] 4-Digit lot number XXXX

table 7. Package information

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

HMC1197LP7FE 数据表(PDF) 12 Page - Analog Devices

HMC1197LP7FE 数据表(HTML) 12 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

数据表下载