GLS53 datasheet(27/109 Pages) EMERSON-NETWORKPOWER

27 / 109 page

GLS110 Series Specifications

Input

Input range

85-264 Vac; 120-300 Vdc

Frequency

47-440 Hz

Inrush current

<18 A peak @ 115 Vac; <36 A peak @ 230 Vac, cold start @ 25°C

Input current

2.5 A max. (RMS) @ 115 Vac

Efficiency

70% typical at full load

EMI filter

Meets FCC Class B conducted; CISPR 22 Class B conducted;

EN55022 Class B conducted; VDE 0878 PT3 Class B conducted

Safety ground

leakage current

<0.5 mA @ 50/60 Hz, 264 Vac input

Output

Maximum power

80 W for convection; 110 W with 30 CFM forced air

Adjustment range

±5% min.

Hold-up time

20 ms @ 80 W load, 115 Vac nominal line

Overload protection

Short circuit protection on all outputs

Case overload protected @ 110 -145% above peak rating

Overvoltage protection

5 V output; 5.7 to 6.7 Vdc; Other outputs 10% to 20% above nominal output; Latching type, recycle AC to reset

Logic Control

Power failure

TTL logic signal goes high 50-150 msec after main output. It goes low at least 4 msec before loss of regulation.

Remote sense

Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected.

Operating temperature

0° to 50°C ambient. Derate each output 2.5% per degree from 50° to 70°C

Storage temperature

-40°C to 85°C

Temperature coefficient

±0.04% per °C

Electromagnetic

susceptibility

Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3

Humidity

Operating; non-condensing 5% to 95%

Vibration

Three orthogonal axes, sweep at 1 oct/min., 5 min. dwell at four major resonances 0.75G peak 5Hz to 500Hz, operational

MTBF demonstrated

>550,000 hours at full load and 25°C ambient conditions

Mating Connectors

AC Input

Molex 09-50-8051 (USA)

09-91-0500 (UK); PINS: 08-58-0111

DC Outputs

Molex 09-50-8091 (USA)

09-91-0900 (UK); PINS: 08-58-0111

Remote Sense/

Power Fail

Molex 22-01-1022 (USA)

22-01-1023 (UK); PINS: 08-50-0114

Connector Kit #70-841-007, includes all of the above

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5mm).

3. Specifications are for convection rating at factory settings unless otherwise stated.

4. Mounting holes M1 and M2 should be grounded for EMI purposes.

5. Mounting hole M1 is safety ground connection.

6. L bracket mounting (6-32) maximum insertion depth is .20”.

7. Warranty: 2 year

8. Weight: 1.25 lbs/0.57 kg

Phone: (800) 377-4384

Email: tech@solahd.com

www.solahd.com

Electrical Specifications

Environmental Specifications

GLS53 数据表(PDF) 27 Page - Emerson Network Power

GLS53 数据表(HTML) 27 Page - Emerson Network Power

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载