GLS53 datasheet(33/109 Pages) EMERSON-NETWORKPOWER

33 / 109 page

GLS150 Series Specifications

Input

Input range

85-132 Vac; 170-264 Vac automatically selected; 220-300 Vdc

Frequency

47-63 Hz

Inrush current

38 A max, cold start @ 25°C

Efficiency

75% typical at full load

EMI filter

FCC Class B conducted; CISPR 22 Class B conducted;

EN55022 Class B conducted; VDE 0878 PT3 Class B conducted

Safety ground

leakage current

<0.5 mA @ 50/60 Hz, 264 Vac input

Output

Maximum power

110 W convection (75 W with cover)

150 W with 30 CFM forced air (130 W with cover)

Adjustment range

±5% min.

Hold-up time

20 ms @ 110 W load, 115/230 Vac nominal line

Overload protection

Short circuit protection

Case overload protected @ 110 -145% above peak rating

Overvoltage protection

5 V output: 5.7 to 6.7 Vdc; Other outputs 10% to 25% above nominal output

Logic Control

Power failure

TTL Logic signal goes high 50-150 msec after 5 V output. It goes low at least 3 ms before loss of regulation

Remote inhibit

Requires an external TTL high signal to inhibit outputs

Remote sense

Compensates for 0.5 V lead drop minimum, will operate without remote sense connected. Reverse connection protected

Operating temperature

0° to 50°C ambient. Derate each output 2.5% per degree from 50° to 70°C

Storage temperature

-40°C to 85°C

Temperature coefficient

±0.04% per °C

Electromagnetic

susceptibility

Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3

Humidity

Operating; non-condensing 5% to 95%

Vibration

Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5 Hz to 500 Hz, operational

MTBF demonstrated

>550,000 hours at full load and 25°C ambient conditions

Mating Connectors

AC Input (SK4)

Molex 09-50-8051 (USA)

Molex 09-91-0500 (UK); PINS: 08-58-0111

Power Fail (SK2)

Molex 09-50-8031 (USA)

Molex 09-91-0300 (UK); PINS: 08-58-0111

Remote Sense/

Remote Inhibit (SK1)

Molex 51110-0851 (USA)

PINS: 50394-8100

Connector Kit #70-841-009, includes all of the above

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5mm).

3. Specifications are for convection rating at factory settings unless otherwise stated.

4. Remote inhibit requires an external 5 V @ 10 mA to activate.

5. Mounting (6-32) maximum insertion depth is .12”.

6. Warranty: 2 year

7. Weight: 1.75 lbs/0.80 kg

Phone: (800) 377-4384

Email: tech@solahd.com

www.solahd.com

Electrical Specifications

Environmental Specifications

GLS53 数据表(PDF) 33 Page - Emerson Network Power

GLS53 数据表(HTML) 33 Page - Emerson Network Power

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载