GLS150 Series Installation & Operating Instructions

GLS152, GLS153, and GLS155 are commercial designations of model numbers LPS152, LPS153, and LPS155 respectively.

While every precaution has been taken to ensure accuracy and completeness in this manual, EGS Electrical Group, LLC. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

The SolaHD and Emerson logos are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. ©2009 EGS Electrical Group, LLC. All rights reserved. Specifications subject to change without notice.

Typical Ventilation Setup

8.50 [216.0]

4.25

[108.0]

0.50 [12.7]

1.00 [25.4]

3.14

[80.0]

1.24

[31.7]

.39 [10.0]

10.00

[254.0]

14.00 [355.6]

OUTPUT

INPUT

AIR FLOW

POWER SUPPLY UNIT

For forced air cooling only

Fan used: MINEBEA 3110NL-04W-B30, 12 V dc, 0.14 A

Dc input for fan during testing: 12 V dc

NOTE: Dimensions and fan used are for reference only

Baseplate for convection cooling and forced

air cooling

(0.039 in/1 mm thick sheet aluminium)

Mechanical Dimensions

.55 [14.0]

7.401 [188.0]

4.25 [108.0]

8.50 [216.0]

.87 [22.2]

2.50 [63.5]

.75 [19.0]

.55 [14.0]

7.401 [188.0]

1.50 [38.0]

All dimensions are in inches [mm]

Screw size: #6-32

Bottom View

Side View