| 数据搜索系统,热门电子元器件搜索 |
|
EDBA164B4PR-1DATF-R 数据表(PDF) 24 Page - Micron Technology |
|
|
|||||||||||||||||||||||||||||
EDBA164B4PR-1DATF-R 数据表(HTML) 24 Page - Micron Technology |
|
24 / 152 page ![]() Ball Descriptions The ball/pad description table below is a comprehensive list of signals for the device family. All signals listed may not be supported on this device. See Ball Assignments for information specific to this device. Table 9: Ball/Pad Descriptions Symbol Type Description CA[9:0]_A, CA[9:0]_B Input Command/address inputs: Provide the command and address inputs according to the command truth table. A separate CA[9:0] is provided for each channel (A and B). CK_t_A, CK_t_B CK_c_A, CK_c_B Input Clock: Differential clock inputs. All CA inputs are sampled on both rising and falling edges of CK. CS and CKE inputs are sampled at the rising edge of CK. AC timings are referenced to clock. A separate CK_t/CK_c is provided for each channel (A and B). CKE[1:0]_A, CKE[1:0]_B Input Clock enable: CKE HIGH activates and CKE LOW deactivates the internal clock signals, input buffers, and output drivers. Power-saving modes are entered and exited via CKE transitions. CKE is considered part of the command code. CKE is sampled on the rising edge of CK. A separate CKE is provided for each channel (A and B). CS[1:0]_n_A, CS[1:0]_n_B Input Chip select: Considered part of the command code and is sampled on the rising edge of CK. A separate CS_n is provided for each channel (A and B). DM[3:0]_A, DM[3:0]_B Input Input data mask: Input mask signal for write data. Although DM balls are input-only, the DM loading is designed to match that of DQ and DQS balls. DM[3:0] is DM for each of the four data bytes, respectively. A separate DM[3:0] is provided for each channel (A and B). DQ[31:0]_A, DQ[31:0]_B I/O Data input/output: Bidirectional data bus. A separate DQ[11:0] is provided for each channel (A and B). DQS[3:0]_t_A, DQS[3:0]_t_B, DQS[3:0]_c_A, DQS[3:0]_c_B I/O Data strobe: Bidirectional (used for read and write data) and complementary (DQS_t and DQS_c). It is edge-aligned output with read data and centered input with write da- ta. DQS[3:0]_t/DQS[3:0]_c is DQS for each of the four data bytes, respectively. A sepa- rate DQS[3:0]_t and DQS[3:0]_c is provided for each channel (A and B). VDDQ_A, VDDQ_B Supply DQ power supply: Isolated on the die for improved noise immunity. VSSQ_A/B Supply DQ ground: Isolated on the die for improved noise immunity. VDD1 _A/B Supply Core power: Supply 1. VDD2_A/B Supply Core power: Supply 2. VSS_A/B Supply Common ground. VREFCA_A, VREFCA_B VREFDQ_A, VREFDQ_B Supply Reference voltage: VREFCA is reference for command/address input buffers, VREFDQ is reference for DQ input buffers. A separate VREFCA and VREFDQ provided for each channel (A and B). ZQ_A, ZQ_B Reference External reference ball for output drive calibration: This ball is tied to an external 240 Ω resistor (RZQ), which is tied to V SSQ. A separate ZQ is provided for each channel (A and B). NU – Not usable: Do not connect. NC – No connect: Not internally connected. (NC) – No connect: Balls indicated as (NC) are no connects; however, they could be connected together internally. 216-Ball and 220-Ball, Dual-Channel LPDDR2 SDRAM Ball Descriptions 09005aef85eb530a 216b_220b_2ch_2e0e_embedded_lpddr2.pdf – Rev. F 08 /16 EN 24 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2014 Micron Technology, Inc. All rights reserved. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |