| 数据搜索系统,热门电子元器件搜索 |
|
SPC58ECX 数据表(PDF) 48 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SPC58ECX 数据表(HTML) 48 Page - STMicroelectronics |
|
48 / 153 page ![]() Electrical characteristics SPC584Cx, SPC58ECx 48/153 DS11620 Rev 8 4.12.2 SAR ADC 12-bit electrical specification The SARn ADCs are 12-bit Successive Approximation Register analog-to-digital converters with full capacitive DAC. The SARn architecture allows input channel multiplexing. Note: The functional operating conditions are given in the DC electrical specifications. Absolute maximum ratings are stress ratings only, and functional operation at the maxima is not guaranteed. Stress beyond the listed maximum may affect device reliability or cause permanent damage to the device. CP2 CC D Internal routing capacitance SARB channels — 2 pF SARn 10bit channels — 0.5 SARn 12bit channels — 1 CS CC D SAR ADC sampling capacitance SARn 12bit — 5 pF SARn 10bit — 2 RSWn CC D Analog switches resistance SARB channels 0 1.8 k Ω SARn 10bit channels 0 0.8 SARn 12bit channels 0 1.8 RAD CC D ADC input analog switches resistance SARn 12bit — 0.8 k Ω SARn 10bit — 3.2 RCMSW CC D Common mode switch resistance Sum of the two resistances —9 k Ω RCMRL CC D Common mode resistive ladder k Ω RSAFEPD(1) CC D Discharge resistance for ADC input-only pins (strong pull-down for safety) VDD_HV_IO = 5.0 V ± 10% — 300 W VDD_HV_IO = 3.3 V ± 10% — 500 W ABGAP CC D ADC digital bandgap accuracy -1.5 +1.5 % CEXT SR — External capacitance at the pad input pin To preserve the accuracy of the ADC, it is necessary that analog input pins have low AC impedance. Placing a capacitor with good high frequency characteristics at the input pin of the device can be effective: the capacitor should be as large as possible. This capacitor contributes to attenuating the noise present on the input pin. The impedance relative to the signal source can limit the ADC’s sample rate. 1. It enables discharge of up to 100 nF from 5 V every 300 ms. Refer to the device pinout Microsoft Excel file attached to the IO_Definition document for the pads supporting it. Table 26. ADC pin specification (continued) Symbol C Parameter Conditions Value Unit Min Max |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |