SPC58ECX datasheet(25/153 Pages) STMICROELECTRONICS

25 / 153 page

DS11620 Rev 8

25/153

SPC584Cx, SPC58ECx

Electrical characteristics

7. Dynamic consumption of one core, including the dedicated I/D-caches and I/D-MEMS contribution.

8. Dynamic consumption of the HSM module, including the dedicated memories, during the execution of Electronic Code

Book crypto algorithm on 1 block of 16 byte of shared RAM.

9. Flash in Low Power. Sysclk at 160 MHz, PLL0_PHI at 160 MHz, XTAL at 40 MHz, FIRC 16 MHz ON, RCOSC1M off.

FlexCAN: instances: 0, 1, 2, 3, 4, 5, 6, 7 ON (configured but no reception or transmission), Ethernet ON (configured but no

reception or transmission), ADC ON (continuously converting). All others IPs clock-gated.

10. Sysclk = RC16 MHz, RC16 MHz ON, RC1 MHz ON, PLL OFF. All possible peripherals off and clock gated. Flash in power

down mode.

11. STANDBY mode: device configured for minimum consumption, RC16 MHz off, RC1 MHz on, OSC32K off, SSWU off.

12. SSWU1 mode adder: FIRC = ON, SSWU clocked at 8 MHz and running over all STANDBY period, ADC off. The total

standby consumption can be obtained by adding this parameter to the IDDSTBY parameter for the selected memory size

and temperature.

13. SSWU2 mode adder: FIRC = ON, SSWU clocked at 8 MHz and running over all STANDBY period, ADC on in continuous

conversion. The total standby consumption can be obtained by adding this parameter to the IDDSTBY parameter for the

selected memory size and temperature.

SPC58ECX 数据表(PDF) 25 Page - STMicroelectronics