Specification
NET2272 USB Peripheral Controller
______________________________________________________________________________
NetChip Technology, Inc., 2003
Patent Pending
335 Pioneer Way, Mountain View, California 94041
TEL (650) 526-1490
FAX (650) 526-1494
http://www.netchip.com
Rev 1.2, October 15, 2003
63
8.5.5 (Address 30h; OURADDR) Our Current USB Address
Bits
Description
Read
Write
Default
Value
7
Force Immediate. If this bit is set when this register is being written, the NET2272
USB address is updated immediately, without waiting for a valid status phase from
the USB host.
0
Yes/Force
0
6:0
Our Address. This field contains the current USB address of the device. This field
is cleared when a root port reset is detected. After this field is written, the register
isn’t actually updated until the corresponding status phase of the control write
transfer completes successfully. This feature allows the firmware to write this field
as soon as the Setup packet is received, rather than waiting for a successful status
phase. Refer to sections 9.2.6.3 and 9.4.6 of the USB 2.0 specification.
Yes
Yes
0
8.5.6 (Address 31h; USBDIAG) USB Diagnostic Register
Bits
Description
Read
Write
Default
Value
7:5
Reserved
Yes
No
0
4
Fast Times. When this bit is set, the frame counter operates at a fast speed for
factory chip testing purposes only.
Yes
Yes
0
3
Reserved.
Yes
No
0
2
Force Receive Error. When this bit is set, an error is forced on the next received
data packet. As a result, the packet will not be acknowledged. This bit is
automatically cleared at the end of the next packet.
Yes
Yes/Set
0
1
Prevent Transmit Bit-Stuff. When this bit is set, normal bit-stuffing is suppressed
during the next transmitted data packet. This will cause a bit-stuffing error when six
or more consecutive bits of ‘1’ are in the data stream. This bit is automatically
cleared at the end of the next packet.
Yes
Yes/Set
0
0
Force Transmit CRC Error. When this bit is set, a CRC error is forced on the next
transmitted data packet. Inverting the most significant bit of the calculated CRC
generates the CRC error. This bit is automatically cleared at the end of the next
packet.
Yes
Yes/Set
0
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
