PIC16F753 datasheet(171/230 Pages) MICROCHIP

171 / 230 page

 2013-2015 Microchip Technology Inc.

DS40001709C-page 171

PIC16F753/HV753

21.6

MPLAB X SIM Software Simulator

The MPLAB X SIM Software Simulator allows code

development in a PC-hosted environment by simulat-

ing the PIC MCUs and dsPIC DSCs on an instruction

level. On any given instruction, the data areas can be

examined or modified and stimuli can be applied from

a comprehensive stimulus controller. Registers can be

logged to files for further run-time analysis. The trace

buffer and logic analyzer display extend the power of

the simulator to record and track program execution,

actions on I/O, most peripherals and internal registers.

The MPLAB X SIM Software Simulator fully supports

symbolic debugging using the MPLAB XC Compilers,

and the MPASM and MPLAB Assemblers. The soft-

ware simulator offers the flexibility to develop and

debug code outside of the hardware laboratory envi-

ronment, making it an excellent, economical software

development tool.

21.7

MPLAB REAL ICE In-Circuit

Emulator System

The MPLAB REAL ICE In-Circuit Emulator System is

Microchip’s next generation high-speed emulator for

Microchip Flash DSC and MCU devices. It debugs and

programs all 8, 16 and 32-bit MCU, and DSC devices

with the easy-to-use, powerful graphical user interface of

the MPLAB X IDE.

The emulator is connected to the design engineer’s

PC using a high-speed USB 2.0 interface and is

connected to the target with either a connector

compatible with in-circuit debugger systems (RJ-11)

or with the new high-speed, noise tolerant, Low-

Voltage Differential Signal (LVDS) interconnection

(CAT5).

The emulator is field upgradable through future firmware

downloads in MPLAB X IDE. MPLAB REAL ICE offers

significant advantages over competitive emulators

including

full-speed

emulation,

run-time

variable

watches, trace analysis, complex breakpoints, logic

probes, a ruggedized probe interface and long (up to

three meters) interconnection cables.

21.8

MPLAB ICD 3 In-Circuit Debugger

System

The MPLAB ICD 3 In-Circuit Debugger System is

Microchip’s most cost-effective, high-speed hardware

debugger/programmer for Microchip Flash DSC and

MCU devices. It debugs and programs PIC Flash

microcontrollers and dsPIC DSCs with the powerful,

yet easy-to-use graphical user interface of the MPLAB

IDE.

The MPLAB ICD 3 In-Circuit Debugger probe is

connected to the design engineer’s PC using a high-

speed USB 2.0 interface and is connected to the target

with a connector compatible with the MPLAB ICD 2 or

MPLAB REAL ICE systems (RJ-11). MPLAB ICD 3

supports all MPLAB ICD 2 headers.

21.9

PICkit 3 In-Circuit Debugger/

Programmer

The MPLAB PICkit 3 allows debugging and program-

ming of PIC and dsPIC Flash microcontrollers at a most

affordable price point using the powerful graphical user

interface of the MPLAB IDE. The MPLAB PICkit 3 is

connected to the design engineer’s PC using a full-

speed USB interface and can be connected to the tar-

get via a Microchip debug (RJ-11) connector (compati-

ble with MPLAB ICD 3 and MPLAB REAL ICE). The

connector uses two device I/O pins and the Reset line

to implement in-circuit debugging and In-Circuit Serial

Programming™ (ICSP™).

21.10 MPLAB PM3 Device Programmer

The MPLAB PM3 Device Programmer is a universal,

CE compliant device programmer with programmable

voltage verification at VDDMIN and VDDMAX for

maximum reliability. It features a large LCD display

(128 x 64) for menus and error messages, and a mod-

ular, detachable socket assembly to support various

package types. The ICSP cable assembly is included

as a standard item. In Stand-Alone mode, the MPLAB

PM3 Device Programmer can read, verify and program

PIC devices without a PC connection. It can also set

code protection in this mode. The MPLAB PM3

connects to the host PC via an RS-232 or USB cable.

The MPLAB PM3 has high-speed communications and

optimized algorithms for quick programming of large

memory devices, and incorporates an MMC card for file

storage and data applications.

PIC16F753 数据表(PDF) 171 Page - Microchip Technology

PIC16F753 数据表(HTML) 171 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载