| 数据搜索系统,热门电子元器件搜索 |
|
M306V2EEFS 数据表(PDF) 85 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M306V2EEFS 数据表(HTML) 85 Page - Renesas Technology Corp |
|
85 / 271 page ![]() Rev.1.40 Oct 06, 2004 page 85 of 269 M306V2ME-XXXFP, M306V2EEFP Figure 2.10.11 Timer Ai mode register in timer mode (i = 0 to 4) (1) Timer mode In this mode, the timer counts an internally generated count source. (See Table 2.10.1.) Figure 2.10.11 shows the timer Ai mode register in timer mode. Table 2.10.1 Specifications of timer mode Item Specification Count source f1, f8, f32, fc32 Count operation • Down count • When the timer underflows, it reloads the reload register contents before continuing counting Divide ratio 1/(n+1) n : Set value Count start condition Count start flag is set (= 1) Count stop condition Count start flag is reset (= 0) Interrupt request generation timing When the timer underflows TA2OUT/TA3OUT pin function Programmable I/O port or pulse output Read from timer Count value can be read out by reading timer Ai register Write to timer • When counting stopped When a value is written to timer Ai register, it is written to both reload register and counter • When counting in progress When a value is written to timer Ai register, it is written to only reload register (Transferred to counter at next reload time) Select function • Pulse output function Each time the timer underflows, the TAiOUT pin’s polarity is reversed Notes 1 : The settings of the corresponding port register and port direction register are invalid. 2: This bit of TAiMR (i = 0 1 4) must always be set to “0 ” Timer Ai mode register Symbol Address When reset TAiMR(i=0 to 4) 039616 to 039A16 0016 Bit name Function Bit symbol W R b7 b6 b5 b4 b3 b2 b1 b0 Operation mode select bit 0 0 : Timer mode b1 b0 TMOD1 TMOD0 MR0 Pulse output function select bit (Note 2) 0 : Pulse is not output (TA2OUT/TA3OUT pin is a normal port pin) 1 : Pulse is output (Note 1) (TA2OUT/TA3OUT pin is a pulse output pin) Must always be set to “0” Reserved bits MR3 0 (Must always be set to “0” in timer mode) 0 0 : f1 0 1 : f8 1 0 : f32 1 1 : fC32 b7 b6 TCK1 TCK0 Count source select bit 00 0 00 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |