| 数据搜索系统,热门电子元器件搜索 |
|
M306V2EEFS 数据表(PDF) 33 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M306V2EEFS 数据表(HTML) 33 Page - Renesas Technology Corp |
|
33 / 271 page ![]() Rev.1.40 Oct 06, 2004 page 33 of 269 M306V2ME-XXXFP, M306V2EEFP Table 2.4.7 Microcomputer status in hold state Item Status Oscillation ON ___ _____ _______ R/W signal, address bus, data bus, CS, BHE Floating Programmable I/O portsP0, P1, P2, P3, P4, P5 Floating P6, P7, P8, P9, P10 Maintains status when hold signal is received __________ HLDA Output “L” Internal peripheral circuitsON (but watchdog timer s tops ) ALE signal Undefined (6) Hold signal The hold signal is used to transfer the bus privileges from the CPU to the external circuits. Inputting “L” __________ to the HOLD pin places the microcomputer in the hold state at the end of the current bus access. This __________ __________ status is maintained and “L” is output from the HLDA pin as long as “L” is input to the HOLD pin. Table 2.4.7 shows the microcomputer status in the hold state. __________ Bus-using priorities are given to HOLD, DMAC, and CPU in order of decreasing precedence. Figure 2.4.7 Bus-using priorities __________ HOLD > DMAC > CPU (7) External bus status when internal area is accessed Table 2.4.8 shows the external bus status when the internal area is accessed. Table 2.4.8 External bus status when the internal area is accessed Item SFR accessed Internal ROM/RAM accessed Address bus Address output Maintain status before accessed address of external area Data bus When read Floating Floating When write Output data Undefined RD, WR, WRL, WRH RD, WR, WRL, WRH output Output "H" BHE BHE output Maintain status before accessed status of external area CS Output "H" Output "H" ALE Output "L" Output "L" (8) BCLK output The output of the internal clock φ can be selected using bit 7 of the processor mode register 0 (address 000416) (Note). The output is floating when bit 7 is set to “1”. Note: Before attempting to change the contents of the processor mode register 0, set bit 1 of the protect register (address 000A16) to “1”. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |