| 数据搜索系统,热门电子元器件搜索 |
|
H8S/2218 数据表(PDF) 531 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/2218 数据表(HTML) 531 Page - Renesas Technology Corp |
|
531 / 750 page ![]() Section 14 Universal Serial Bus (USB) Rev.6.00 Jun. 03, 2008 Page 483 of 698 REJ09B0074-0600 14.3.18 USB Interrupt Flag Register 3 (UIFR3) UIFR3 is an interrupt flag register indicating the USB status. If the corresponding bit is set to 1, the corresponding EXIRQ0, EXIRQ1, or IRQ6 interrupt is requested to the CPU. VBUSi, SPRSi, SETC, SOF, and CK48READY flags can be cleared by writing 0 to them. Writing 1 to them is invalid and causes no operation. Consequently, to clear a flag, write 0 to the corresponding bit and 1 to all the other bits. (For example, write H'DF to clear bit 5.) The bit-clear instruction is a read/modify/write instruction, so if a new flag is set between the read and write operations, there is a danger that it may be cleared erroneously. Therefore, do not use the bit-clear instruction to clear bits in this interrupt flag resister. VBUSs and SPRSs are status bits and cannot be cleared. Bit Bit Name Initial Value R/W Description 7 CK48READY 0 R/(W)* USB Operating Clock (48 MHz) Stabilization Detection Set to 1 when the USB operating clock (48 MHz) stabilization time has been automatically counted after USB module stop mode cancellation. The corresponding interrupt output is EXIRQ0 or EXIRQ1. CK48READY can also operate in the USB interface software reset state (the UIFRST bit in UCTLR is set to 1). Refer to the UCKS3 to UCKS0 bits in section 14.3.1, USB Control Register (UCTLR). 6 SOF 0 R/(W)* Start of Frame Packet Detection Set to 1 if the Start of Frame (SOF) packet is detected. The corresponding interrupt output is EXIRQ0 or EXIRQ1. 5 SETC 0 R/(W)* Set_Configuration Command Detection Set to 1 if the Set_Configuration command is detected. The corresponding interrupt output is EXIRQ0 or EXIRQ1. 4 — 0 R Reserved This bit is always read as 0 and cannot be modified. 3 SPRSs 0 R Suspend/Resume Status SPRSs indicates the suspend/resume status. However, an interrupt cannot be requested by SPRSs. 0: Indicates that the bus is in the normal state. 1: Indicates that the bus is in the suspend state. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |