H8SLASH3003 datasheet(369/715 Pages) RENESAS

369 / 715 page

10.4.7 Phase Counting Mode

In phase counting mode the phase difference between two external clock inputs (at the TCLKA

and TCLKB pins) is detected, and TCNT2 counts up or down accordingly.

In phase counting mode, the TCLKA and TCLKB pins automatically function as external clock

input pins and TCNT2 becomes an up/down-counter, regardless of the settings of bits TPSC2 to

TPSC0, CKEG1, and CKEG0 in TCR2. Settings of bits CCLR1, CCLR0 in TCR2, and settings in

TIOR2, TIER2, TSR2, GRA2, and GRB2 are valid. The input capture and output compare

functions can be used, and interrupts can be generated.

Phase counting is available only in channel 2.

Sample Setup Procedure for Phase Counting Mode: Figure 10-43 shows a sample procedure

for setting up phase counting mode.

Figure 10-43 Setup Procedure for Phase Counting Mode (Example)

Phase counting mode

Select phase counting mode

Select flag setting condition

Start counter

Phase counting mode

Set the MDF bit in TMDR to 1 to select

phase counting mode.

Select the flag setting condition with

the FDIR bit in TMDR.

Set the STR2 bit to 1 in TSTR to start

the timer counter.

351

H8/3003 数据表(PDF) 369 Page - Renesas Technology Corp