ST7MC1 datasheet(32/308 Pages) STMICROELECTRONICS

32 / 308 page

ST7MC1/ST7MC2

32/308

SYSTEM INTEGRITY MANAGEMENT (Cont’d)

6.3.2 Auxiliary Voltage Detector (AVD)

The Voltage Detector function (AVD) is based on

an analog comparison between a VIT-(AVD) and

VIT+(AVD) reference value and the VDD main sup-

ply. The VIT- reference value for falling voltage is

lower than the VIT+ reference value for rising volt-

age in order to avoid parasitic detection (hystere-

sis).

The output of the AVD comparator is directly read-

able by the application software through a real

time status bit (AVDF) in the SICSR register. This

bit is read only.

Caution: The AVD function is active only if the

LVD is enabled through the option byte (see sec-

tion 14.1 on page 290).

6.3.2.1 Monitoring the VDD Main Supply

If the AVD interrupt is enabled, an interrupt is gen-

erated when the voltage crosses the VIT+(AVD) or

VIT-(AVD) threshold (AVDF bit toggles).

In the case of a drop in voltage, the AVD interrupt

acts as an early warning, allowing software to shut

down safely before the LVD resets the microcon-

troller. See Figure 18.

The interrupt on the rising edge is used to inform

the application that the VDD warning state is over.

If the voltage rise time trv is less than 256 or 4096

CPU cycles (depending on the reset delay select-

ed by option byte), no AVD interrupt will be gener-

ated when VIT+(AVD) is reached.

If trv is greater than 256 or 4096 cycles then:

– If the AVD interrupt is enabled before the

VIT+(AVD) threshold is reached, then 2 AVD inter-

rupts will be received: the first when the AVDIE

bit is set, and the second when the threshold is

reached.

– If the AVD interrupt is enabled after the VIT+(AVD)

threshold is reached then only one AVD interrupt

will occur.

Figure 18. Using the AVD to Monitor VDD

VDD

VIT+(AVD)

VIT-(AVD)

AVDF bit

IF AVDIE bit = 1

Vhyst

AVD INTERRUPT

REQUEST

INTERRUPT PROCESS

VIT+(LVD)

VIT-(LVD)

LVD RESET

Early Warning Interrupt

(Power has dropped, MCU not

not yet in reset)

trv VOLTAGE RISE TIME

ST7MC1 数据表(PDF) 32 Page - STMicroelectronics

ST7MC1 数据表(HTML) 32 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载