AD9957SLASHPCBZ datasheet(58/61 Pages) AD

58 / 61 page

AD9957

Data Sheet

Rev. F | Page 58 of 61

Control Function Register 3 (CFR3)

Address 0x02, four bytes are assigned to this register.

Table 20. Bit Descriptions for CFR3 Register

Bit (s)

Mnemonic

Description

[31:30]

Open

[29:28]

DRV0

Controls REFCLK_OUT pin (see Table 6 for details); default is 01b.

Open

[26:24]

VCO SEL

Selects frequency band of the VCO in the REFCLK PLL (see Table 7 for details); default is 111b.

[23:22]

Open

[21:19]

ICP

Selects the charge pump current in the REFCLK PLL (see Table 8 for details); default is 111b.

[18:16]

Open

REFCLK Input Divider Bypass

0: input divider is selected (default).

1: input divider is bypassed.

REFCLK Input Divider ResetB

0: input divider is reset.

1: input divider operates normally (default).

[13:9]

Open

PLL Enable

0: REFCLK PLL bypassed (default).

1: REFCLK PLL enabled.

[7:1]

This 7-bit number is divide modulus of the REFCLK PLL feedback divider; default is 0000000b.

Open

Auxiliary DAC Control Register

Address 0x03, four bytes are assigned to this register.

Table 21. Bit Descriptions for Auxiliary DAC Control Register

Bit(s)

Mnemonic

Description

[31:8]

Open

[7:0]

FSC

This 8-bit number controls the full-scale output current of the main DAC (see the Auxiliary DAC section); default is 0xFF.

I/O Update Rate Register

Address 0x04, four bytes are assigned to this register. This register is effective without the need for an I/O update.

Table 22. Bit Descriptions for I/O Update Rate Register5

Bit(s)

Mnemonic

Description

[31:0]

I/O Update Rate

Ineffective unless CFR2, Bit 23 = 1. This 32-bit number controls the automatic I/O update rate (see the Automatic

I/O Update section); default is 0xFFFFFFFF.

RAM Segment Register 0

Address 0x05, six bytes are assigned to this register. This register is effective without the need for an I/O update. This register is only

active if CFR1, Bit 31 = 1 and there is a Logic 0 to Logic 1 transition on the RT pin.

Table 23. Bit Descriptions for RAM Segment Register 0

Bit(s)

Mnemonic

Description

[47:32]

RAM Address Step Rate 0

This 16-bit number controls the rate at which the RAM state machine steps through the specified

RAM address range.

[31:22]

RAM End Address 0

This 10-bit number identifies the ending address for the RAM state machine.

[21:16]

Open

[15:6]

RAM Start Address 0

This 10-bit number identifies the starting address for the RAM state machine.

[5:3]

Open

[2:0]

RAM Playback Mode 0

This 3-bit number identifies the playback mode for the RAM state machine (see Table 5).

AD9957/PCBZ 数据表(PDF) 58 Page - Analog Devices

AD9957/PCBZ 数据表(HTML) 58 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

数据表下载

链接网址

AD9957/PCBZ 数据表(PDF) 58 Page - Analog Devices

AD9957/PCBZ 数据表(HTML) 58 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

数据表 下载

链接网址

数据表下载