GLS53 datasheet(102/109 Pages) EMERSON-NETWORKPOWER

102 / 109 page

GLX200 Cover Enclosure Kit

P/N: A272-206 Rev 0 12/08/09 Ref: LPX200

Designed for the following power supplies: GL200-M Series

What’s Included

• One base

• One cover

• One insulator sheet (plastic)

• Four M3 x 6mm Pan head screws (with attached spring washers)

• Four M3 x 6mm countersunk screws

• One M4 nut (for earth ground stud)

• One M4 spring washer (for earth ground stud)

• One M4 star washer (for earth ground stud)

Assembly

1.Place insulator sheet over base standoffs.

2.Place power supply over insulator sheet and align with base standoffs.

NOTE: Ensure the insulator sheet is correctly fitted in the base under the PBC to

maintain safety creepage and clearances.

3.Secure power supply to base using the supplied M3 x 6mm Pan head screws (4).

4.Place cover over power supply and align with base countersink holes.

5.Secure cover to base using the supplied M3 x 6mm countersunk screws (4).

Notes

• Ensure base is firmly connected to supply earth via the earth ground stud .

• Ensure that the relevant safety standards (e.g. EN60950-1) are complied with, in

respect to creepage and clearance distances, and distances through insulation.

• All dimensions are in inches [mm].

Output Terminals

Input Terminals

Insulator Sheet

Earth Ground Stud

Standoff (4X)

Cover

M3 x 6mm

Countersunk

Screw (4X)

Base

M3 x 6mm Pan

Head Screw (4X)

M4 Spring Washer

M4 Nut

M4 Star Washer

Power Supply

Figure 1: Assembly Drawing

Page1of2

GLS53 数据表(PDF) 102 Page - Emerson Network Power

GLS53 数据表(HTML) 102 Page - Emerson Network Power

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载