GLX250-CEF Cover End Fan Kit

P/N: A272-218 Rev 0 12/14/09 Ref: LPX250-CEF

While every precaution has been taken to ensure accuracy and completeness in this manual, EGS Electrical Group, LLC. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

The SolaHD and Emerson logos are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. ©2009 EGS Electrical Group, LLC. All rights reserved. Specifications subject to change without notice.

Designed for the following power supplies: GL250 Series

What’s Included

• One cover with end fan

• Four M3 x 6mm countersunk screws

Recommended Assembly

1.Remove M3 x 6mm countersunk screws (4) and original cover.

2.Attach the two fan wires to SK4 and SK7 output connectors.

Output Adj.

SK4

SK3

SK7

SK5

+-

+-

Figure 1: Fan connection

3.Place cover over power supply and align with base countersink holes.

4.Secure cover to base using the supplied M3 x 6mm countersunk screws (4).

Overall Dimensions

8.52 [216.4]

0.24

[6.1]

2.01

[51.0]

Max

1.18

[30.0]

1.87

[47.5]

Max

Figure 2: Mechanical Drawing

Notes

• All dimensions are in inches [mm].

• Ensure that the relevant safety standards (e.g. EN60950-1) are complied with in

respect to creepage and clearance distances, and distances through insulation.

Technical Support

U.S.: (800) 377-4384 • International: (847) 268-6000

E-mail: tech@solahd.com • Web site: www.solahd.com