MPC8540CPX667JC datasheet(8/104 Pages) FREESCALE

8 / 104 page

MPC8540 Integrated Processor Hardware Specifications, Rev. 4

Freescale Semiconductor

Electrical Characteristics

2.1 Overall DC Electrical Characteristics

This section covers the ratings, conditions, and other characteristics.

2.1.1 Absolute Maximum Ratings

Table 1 provides the absolute maximum ratings.

Table 1. Absolute Maximum Ratings 1

Characteristic

Symbol

Max Value

Unit

Notes

Core supply voltage

For devices rated at 667 and 833 MHz

For devices rated at 1 GHz

VDD

–0.3 to 1.32

–0.3 to 1.43

PLL supply voltage

For devices rated at 667 and 833 MHz

For devices rated at 1 GHz

AVDD

–0.3 to 1.32

–0.3 to 1.43

DDR DRAM I/O voltage

GVDD

–0.3 to 3.63

Three-speed Ethernet I/O voltage

LVDD

–0.3 to 3.63

–0.3 to 2.75

PCI/PCI-X, local bus, RapidIO, 10/100 Ethernet, MII

management, DUART, system control and power

management, I2C, and JTAG I/O voltage

OVDD

–0.3 to 3.63

Input voltage

DDR DRAM signals

MVIN

–0.3 to (GVDD + 0.3)

2, 5

DDR DRAM reference

MVREF

–0.3 to (GVDD + 0.3)

2, 5

Three-speed Ethernet signals

LVIN

–0.3 to (LVDD + 0.3)

4, 5

PCI/PCI-X, Local bus, RapidIO,

10/100 Ethernet, DUART,

SYSCLK, system control and

power management, I2C, and

JTAG signals

OVIN

–0.3 to (OVDD + 0.3)

Storage temperature range

TSTG

–55 to 150

•C

Notes:

1.Functional and tested operating conditions are given in Table 2. Absolute maximum ratings are stress

ratings only, and functional operation at the maximums is not guaranteed. Stresses beyond those listed

may affect device reliability or cause permanent damage to the device.

2.Caution: MVIN must not exceed GVDD by more than 0.3 V. This limit may be exceeded for a maximum of

20 ms during power-on reset and power-down sequences.

3.Caution: OVIN must not exceed OVDD by more than 0.3 V. This limit may be exceeded for a maximum of 20

ms during power-on reset and power-down sequences.

4.Caution: LVIN must not exceed LVDD by more than 0.3 V. This limit may be exceeded for a maximum of 20

ms during power-on reset and power-down sequences.

5.(M,L,O)VIN and MVREF may overshoot/undershoot to a voltage and for a maximum duration as shown in

Figure 2.

MPC8540CPX667JC 数据表(PDF) 8 Page - Freescale Semiconductor, Inc

MPC8540CPX667JC 数据表(HTML) 8 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

MPC8540CPX667JC 数据表(PDF) 8 Page - Freescale Semiconductor, Inc

MPC8540CPX667JC 数据表(HTML) 8 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载