MPC8358ECVVADDGA datasheet(33/102 Pages) FREESCALE

33 / 102 page

MPC8360E/MPC8358E PowerQUICC II Pro Processor Revision 2.x TBGA Silicon Hardware Specifications, Rev. 5

Freescale Semiconductor

GMII, MII, RMII, TBI, RGMII, and RTBI AC Timing Specifications

8.2.4.1

TBI Transmit AC Timing Specifications

This table provides the TBI transmit AC timing specifications.

This figure shows the TBI transmit AC timing diagram.

Figure 18. TBI Transmit AC Timing Diagram

Table 33. TBI Transmit AC Timing Specifications

At recommended operating conditions with LVDD/OVDD of 3.3 V ± 10%.

Parameter/Condition

Symbol1

Min

Typ

Max

Unit

Notes

GTX_CLK clock period

tTTX

—8.0

—

GTX_CLK duty cycle

tTTXH/tTTX

—

GTX_CLK to TBI data TCG[9:0] delay

tTTKHDX

tTTKHDV

1.0

—

——

5.0

GTX_CLK clock rise time, (20% to 80%)

tTTXR

——

1.0

—

GTX_CLK clock fall time, (80% to 20%)

tTTXF

——

1.0

—

GTX_CLK125 reference clock period

tG125

—8.0

—

GTX_CLK125 reference clock duty cycle

tG125H/tG125

—

Notes:

1. The symbols used for timing specifications follow the pattern of t(first two letters of functional block)(signal)(state )(reference)(state) for

inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tTTKHDV symbolizes the TBI

transmit timing (TT) with respect to the time from tTTX (K) going high (H) until the referenced data signals (D) reach the valid

state (V) or setup time. Also, tTTKHDX symbolizes the TBI transmit timing (TT) with respect to the time from tTTX (K) going

high (H) until the referenced data signals (D) reach the invalid state (X) or hold time. Note that, in general, the clock reference

symbol representation is based on three letters representing the clock of a particular functional. For example, the subscript

of tTTX represents the TBI (T) transmit (TX) clock. For rise and fall times, the latter convention is used with the appropriate

letter: R (rise) or F (fall).

2. This symbol is used to represent the external GTX_CLK125 and does not follow the original symbol naming convention.

3. In rev. 2.0 silicon, due to errata, tTTKHDX minimum is 0.7 ns for UCC1. Refer to Errata QE_ENET19 in Chip Errata for the

MPC8360E, Rev. 1.

GTX_CLK

TXD[7:0]

tTTX

tTTXH

tTTXR

tTTXF

tTTKHDX

TX_EN

TX_ER

MPC8358ECVVADDGA 数据表(PDF) 33 Page - Freescale Semiconductor, Inc

MPC8358ECVVADDGA 数据表(HTML) 33 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载