| 数据搜索系统,热门电子元器件搜索 |
|
AR0330 数据表(PDF) 52 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
AR0330 数据表(HTML) 52 Page - ON Semiconductor |
|
52 / 77 page ![]() AR0330_DS Rev. U Pub. 4/15 EN 52 ©Semiconductor Components Industries, LLC,2015. AR0330: 1/3-Inch CMOS Digital Image Sensor Sensor Frame Rate Row Period (TROW) The line_length_pck will determine the number of clock periods per row and the row period (TROW) when combined with the sensor readout clock. The line_length_pck includes both the active pixels and the horizontal blanking time per row. The sensor utilizes two readout paths, as seen in Figure 18 on page 33, allowing the sensor to output two pixels during each pixel clock. The minimum line_length_pck is defined as the maximum of the following three equa- tions: ADC Readout Limitation: (EQ 20) Options to modify this limit, as mentioned in the “Sequencer” section, can be found in the AR0330 Developer Guide. Digital Readout Limitation: (EQ 21) Output Interface Limitations: (EQ 22) Row Periods Per Frame The frame_length_lines determines the number of row periods (TROW) per frame. This includes both the active and blanking rows. The minimum_vertical_blanking value is defined by the number of OB rows read per frame, two embedded data rows, and two blank rows. (EQ 23) The sensor is configured to output frame information in two embedded data rows by setting R0x3064[8] to 1 (default). If R0x3064[8] is set to 0, the sensor will instead output two blank rows. The data configured in the two embedded rows is defined in MIPI CSI-2 Specification V1.00. The locations of the OB rows, embedded rows, and blank rows within the frame readout are identified in Figure 36: “Slave Mode Active State and Vertical Blanking,” on page 53. Table 37: Minimum Vertical Blanking Configuration R0x3180[0x00F0] OB Rows minimum_vertical_blanking 0x8 (Default) 8 OB Rows 8 OB + 4 = 12 0x4 4 OB Rows 4 OB + 4 = 8 0x2 2 OB Rows 2 OB + 4 = 6 1204 ADC_HIGH_SPEED 0 = or 1116 ADC_HIGH_SPEED 10 = 1 3 --- x_addr_end x_addr_start – x_odd_inc 1 + 0.5 ----------------------------------------------------------------- 1 2 --- x_addr_end x_addr_start – x_odd_inc 1 + 0.5 ----------------------------------------------------------------- 96 + Minimum frame_length_lines y_addr_end y_addr_start – y_odd_inc 1 + 2 ----------------------------------------------------------------- minimum_vertical_blanking + = |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |