| 数据搜索系统,热门电子元器件搜索 |
|
AR0330 数据表(PDF) 19 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
AR0330 数据表(HTML) 19 Page - ON Semiconductor |
|
19 / 77 page ![]() AR0330_DS Rev. U Pub. 4/15 EN 19 ©Semiconductor Components Industries, LLC,2015. AR0330: 1/3-Inch CMOS Digital Image Sensor Electrical Characteristics Caution Stresses greater than those listed in Table 13 may cause permanent damage to the device. This is a stress rating only, and functional operation of the device at these or any other con- ditions above those indicated in the operational sections of this specification is not implied. Note: Exposure to absolute maximum rating conditions for extended periods may affect reliability. Table 11: DC Electrical Definitions and Characteristics (Parallel Mode) fEXTCLK = 24 MHz; VDD = 1.8 V; VDD_IO = 1.8 V; VAA = 2.8 V; VAA_PIX = 2.8 V; VDD_PLL = 2.8 V; Output load = 68.5 pF; TJ = 60°C; 2304 x 1296 at 30 fps Definition Symbol Min Typ Max Unit Core digital voltage VDD 1.7 1.8 1.9 V I/O digital voltage VDD_IO 1.7 1.8 1.9 V 2.4 2.8 3.1 V Analog voltage VAA 2.7 2.8 2.9 V Pixel supply voltage VAA_PIX 2.7 2.8 2.9 V PLL supply voltage VDD_PLL 2.7 2.8 2.9 V Digital operating current I(VDD) 66.5 75 mA I/O digital operating current I(VDD_IO) 24 35 mA Analog operating current I(VAA)36 44 mA Pixel supply current I(VAA_PIX) 10.5 18 mA PLL supply current I(VDD_PLL) 6 11 mA Table 12: Standby Power fEXTCLK = 24 MHz; VDD = 1.8 V; VDD_IO = 1.8 V; VAA = 2.8 V; VAA_PIX = 2.8 V; VDD_PLL = 2.8 V; Output load = 68.5 pF; TJ = 60°C Power Typical Max Unit Hard Standby (CLK OFF) Digital 19.8 35.8 A Analog 5.8 7.0 A Soft Standby (CLK OFF) Digital 23.5 39.7 A Analog 5.4 5.9 A Soft Standby (CLK ON) Digital 15700 16900 A Analog 5.5 5.7 A Table 13: Absolute Maximum Ratings Symbol Definition Min Max Unit VDD_MAX Core digital voltage –0.3 2.4 V VDD_IO_MAX I/O digital voltage –0.3 4 V VAA_MAX Analog voltage –0.3 4 V VAA_PIX Pixel supply voltage –0.3 4 V VDD_PLL PLL supply voltage –0.3 4 V VDD_MIPI MIPI supply voltage –0.3 4 V VDD_HiSPi_MAX HiSPi digital voltage –0.3 2.4 V VDD_HiSPi_TX_MAX HiSPi I/O digital voltage –0.3 2.4 V tST Storage temperature –40 85 °C |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |