TMS320C31PQL60 datasheet(13/48 Pages) TI

13 / 48 page

TMS320C31, TMS320LC31

DIGITAL SIGNAL PROCESSORS

SPRS035B – MARCH 1996 – REVISED JANUARY 1999

POST OFFICE BOX 1443

• HOUSTON, TEXAS 77251–1443

PARAMETER MEASUREMENT INFORMATION

Tester Pin

Electronics

VLoad

IOL

IOH

Output

Under

Test

Where:

IOL

= 2 mA (all outputs)

IOH

= 300

µA (all outputs)

VLOAD = 2.15 V

= 80-pF typical load-circuit capacitance

Figure 4. TMS320C31 Test Load Circuit

signal transition levels for ’C31 (see Figure 5 and Figure 6)

TTL-level outputs are driven to a minimum logic-high level of 2.4 V and to a maximum logic-low level of 0.6 V.

Output transition times are specified as follows:

D For a high-to-low transition on a TTL-compatible output signal, the level at which the output is said to be

no longer high is 2 V and the level at which the output is said to be low is 1 V.

D For a low-to-high transition, the level at which the output is said to be no longer low is 1 V and the level at

which the output is said to be high is 2 V.

0.6 V

1 V

2 V

2.4 V

Figure 5. TTL-Level Outputs

Transition times for TTL-compatible inputs are specified as follows:

D For a high-to-low transition on an input signal, the level at which the input is said to be no longer high is

2 V and the level at which the input is said to be low is 0.8 V.

D For a low-to-high transition on an input signal, the level at which the input is said to be no longer low is

0.8 V and the level at which the input is said to be high is 2 V.

2 V

0.8 V

Figure 6. TTL-Level Inputs

TMS320C31PQL60 数据表(PDF) 13 Page - Texas Instruments

TMS320C31PQL60 数据表(HTML) 13 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

数据表下载