ST72734 datasheet(25/144 Pages) STMICROELECTRONICS

25 / 144 page

ST72774/ST727754/ST72734

25/144

3.4 POWER SAVING MODES

3.4.1 WAIT Mode

This mode is a low power consumption mode. The

WFI instruction places the MCU in WAIT mode:

The internal clock remains active but all CPU

processing

stopped;

however,

all

other

peripherals are still running.

Note: In WAIT mode, DMA accesses (DDC, USB)

are possible.

During WAIT mode, the I bit in the condition code

causes the MCU to exit WAIT mode, causes the

corresponding interrupt vector to be fetched, the

interrupt routine to be executed and normal

processing to resume. A reset causes the program

counter to fetch the reset vector and processing

starts as for a normal reset.

Table 5 gives a list of the different sections

affected by the low power modes. For detailed

information on a particular device, please refer to

the corresponding part.

3.4.2 HALT Mode

The HALT mode is the MCU lowest power

consumption mode. Meanwhile, the HALT mode

also stops the oscillator stage completely which is

the most critical condition in CRT monitors.

For this reason, the HALT mode has been disabled

and its associated HALT instruction is now

considered as illegal and will generate a reset.

Figure 14. WAIT Flow Chart

WFI INSTRUCTION

RESET

INTERRUPT

CPU CLOCK

OSCILLATOR

PERIPH. CLOCK

I-BIT

CLEARED

OFF

CPU CLOCK

OSCILLATOR

PERIPH. CLOCK

I-BIT

SET

FETCH RESET VECTOR

OR SERVICE INTERRUPT

4096 CPU CLOCK

CYCLES DELAY

IF RESET

Note: Before servicing an interrupt, the CC register is

pushed on the stack. The I-Bit is set during the inter-

rupt routine and cleared when the CC register is

popped.

ST72734 数据表(PDF) 25 Page - STMicroelectronics

ST72734 数据表(HTML) 25 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载