L6717ATR datasheet(49/57 Pages) STMICROELECTRONICS

49 / 57 page

DocID024465 Rev 1

49/57

L6717A

High current embedded drivers

10.2

Power dissipation

It is important to consider the power that the device is going to dissipate in driving the

external MOSFETs in order to avoid overcoming the maximum junction operative

temperature.

Two main terms contribute in the device power dissipation: bias power and drivers' power.

•

Device power (P

) depends on the static consumption of the device through the

supply pins and it is simply quantifiable as follow:

•

Drivers' power is the power needed by the driver to continuously switch ON and OFF

the external MOSFETs; it is a function of the switching frequency and total gate charge

of the selected MOSFETs. It can be quantified considering that the total power P

dissipated to switch the MOSFETs dissipated by three main factors: external gate

resistance (when present), intrinsic MOSFET resistance and intrinsic driver resistance.

This last term is the important one to be determined to calculate the device power

dissipation.

The total power dissipated to switch the MOSFETs for each phase featuring embedded

driver results:

Where Q

GHSx

is the total gate charge of the HS MOSFETs and Q

GLSx

is the total gate

charge of the LS MOSFETs for both CORE and NB sections (only Phase1 and Phase2

for CORE section); VBOOTx is the driving voltage for the HSx MOSFETs.

VC CD R

⋅

SW x

GHS x

VC CD R

⋅

GLS x

VB OOT x

⋅

()

⋅

L6717ATR 数据表(PDF) 49 Page - STMicroelectronics

L6717ATR 数据表(HTML) 49 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

数据表下载