LSM6DSOP datasheet(35/107 Pages) STMICROELECTRONICS

部件名	LSM6DSOP

功能描述	iNEMO inertial module:always-on 3D accelerometer and 3D gyroscope

PDF	107 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

35 / 107 page

DocID032926 Rev 5

35/107

LSM6DSOP

Functionality

107

6.3

Gyroscope power modes

In the LSM6DSOP, the gyroscope can be configured in four different operating modes:

power-down, low-power, normal mode and high-performance mode. The operating mode

selected depends on the value of the G_HM_MODE bit in CTRL7_G (16h). If G_HM_MODE

is set to '0', high-performance mode is valid for all ODRs (from 12.5 Hz up to 6.66 kHz).

To enable the low-power and normal mode, the G_HM_MODE bit has to be set to '1'. Low-

power mode is available for lower ODRs (12.5, 26, 52 Hz) while normal mode is available

for ODRs equal to 104 and 208 Hz.

6.4

Block diagram of filters

Figure 13. Block diagram of filters

6.4.1

Block diagrams of the accelerometer filters

In the LSM6DSOP, the filtering chain for the accelerometer part is composed of the

following:



Analog filter (anti-aliasing)



Digital filter (LPF1)



Composite filter

Details of the block diagram appear in the following figure.

Figure 14. Accelerometer chain

LSM6DSOP 数据表(PDF) 35 Page - STMicroelectronics