 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
M58LR128HT 数据表(PDF) 108 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
M58LR128HT 数据表(HTML) 108 Page - STMicroelectronics |
|
|
108 / 112 page  Command interface state tables M58LR128HT, M58LR128HB 108/112 Program in Erase Suspend Setup Program Busy in Erase Suspend N/A Busy IS in Program busy in ES Program Busy in Erase Suspend ES IS in Program busy in ES Program Busy in Erase Suspend IS in ES Suspend IS in PS in ES Program Suspend in Erase Suspend N/A IS in PS in ES Program Suspend in Erase Suspend Buffer Program in Erase Suspend Setup Buffer Program Load 1 in Erase Suspend (give word count load (N-1)) N/A Buffer Load 1 Buffer Program Load 2 in Erase Suspend(7) Exit see note (7) Buffer Load 2 Buffer Program Confirm in Erase Suspend when count =0; Else Buffer Program Load 2 in Erase Suspend (note: Buffer Program will fail at this point if any block address is different from the first address) Confirm Erase Suspend (sequence error) Busy IS in BP busy in ES Buffer Program Busy in Erase Suspend ES IS in BP busy in ES BP busy in ES IS in ES Suspend IS in BP suspend in ES Buffer Program Suspend in Erase Suspend N/A IS in BP Suspend in ES Buffer Program Suspend in Erase Suspend Blank Check Setup Ready (error) N/A Blank Check busy IS in Blank Check busy Blank Check busy Ready Lock/CR Setup in ES Erase Suspend (Lock error) Erase Suspend Erase Suspend (Lock error) N/A BEFP Setup Ready (error) N/A Busy BEFP Busy(8) Exit BEFP Busy(8) N/A 1. CI = Command Interface, CR = Configuration register, BEFP = Buffer Enhanced Factory program, P/E C = Program/Erase controller, IS = Illegal State, BP = Buffer program, ES = Erase suspend, WA0 = Address in a block different from first BEFP address. 2. If the P/E C is active, both cycle are ignored. 3. BEFP Exit when Block Address is different from first Block Address and data are FFFFh. 4. Illegal commands are those not defined in the command set. 5. N/A: not available. In this case the state remains unchanged. 6. If N=0 go to Buffer Program Confirm. Else (not =0) go to Buffer Program Load 2 (data load) 7. If N=0 go to Buffer Program Confirm in Erase suspend. Else (not =0) go to Buffer Program Load 2 in Erase suspend. 8. BEFP is allowed only when Status Register bit SR0 is set to '0'. BEFP is busy if Block Address is first BEFP Address. Any other commands are treated as data. Table 44. Command interface states - lock table, next state(1) (continued) Current CI State Command Input Lock/CR Setup(2) (60h) OTP Setup(2) (C0h) Block Lock Confirm (01h) Block Lock- Down Confirm (2Fh) Set CR Confirm (03h) Block Address (WA0)(3) (XXXXh) Illegal Command(4) P/E C operation completed (5) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
