 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
PIC16F753 数据表(PDF) 150 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC16F753 数据表(HTML) 150 Page - Microchip Technology |
|
|
150 / 230 page  PIC16F753/HV753 DS40001709C-page 150 2013-2015 Microchip Technology Inc. REGISTER 19-1: CONFIGURATION WORD R/P-1 R/P-1 R/P-1 R/P-1 R/P-1 R/P-1 DEBUG CLKOUTEN WRT<1:0> BOREN<1:0> bit 13 bit 8 U-1 R/P-1 R/P-1 R/P-1 R/P-1 U-1 U-1 R/P-1 — CP MCLRE PWRTE WDTE — — FOSC0 bit 7 bit 0 Legend: R = Readable bit P = Programmable bit U = Unimplemented bit, read as ‘1’ ‘0’ = Bit is cleared ‘1’ = Bit is set -n = Value when blank or after Bulk Erase bit 13 DEBUG: Debug Mode Enable bit(2) 1 = Background debugger is disabled 0 = Background debugger is enabled bit 12 CLKOUTEN: Clock Out Enable bit 1 = Clock out function disabled. CLKOUT pin acts as I/O pin 0 = General purpose I/O disabled. CLKOUT pin acts as CLKOUT bit 11-10 WRT<1:0>: Flash Program Memory Self Write Enable bit 11 = Write protection off 10 = 000h to FFh write-protected, 100h to 3FFh may be modified by PMCON1 control 01 = 000h to 1FFh write-protected, 200h to 3FFh may be modified by PMCON1 control 00 = 000h to 3FFh write-protected, entire program is write-protected bit 8-9 BOREN<1:0>: Brown-out Reset Enable bits 11 = BOR enabled 10 = BOR enabled during operation and disabled in Sleep 0x = BOR disabled bit 7 Unimplemented: Read as ‘1’ bit 6 CP: Code Protection bit 1 = Program memory code protection is disabled 0 = Program memory code protection is enabled bit 5 MCLRE: MCLR/VPP Pin Function Select bit 1 = MCLR pin is MCLR function and weak internal pull-up is enabled 0 = MCLR pin is input function, MCLR function is internally disabled bit 4 PWRTE: Power-up Timer Enable bit(1) 1 = PWRT disabled 0 = PWRT enabled bit 3 WDTE: Watchdog Timer Enable bit 1 = WDT enabled 0 = WDT disabled bit 2-1 Unimplemented: Read as ‘1’ bit 0 FOSC: Oscillator Selection bits 1 = EC oscillator selected: CLKIN on RA5/CLKIN 0 = Internal oscillator: I/O function on RA5/CLKIN Note 1: Enabling Brown-out Reset does not automatically enable Power-up Timer. 2: The Configuration bit is managed automatically by the device development tools. The user should not attempt to manually write this bit location. However, the user should ensure that this location has been programmed to a ‘1’ and the device checksum is correct for proper operation of production software. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
