| 数据搜索系统,热门电子元器件搜索 |
|
H8S/2225 数据表(PDF) 580 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/2225 数据表(HTML) 580 Page - Renesas Technology Corp |
|
580 / 1071 page ![]() Section 14 IEBus™ Controller (IEB) [H8S/2258 Group] Rev. 5.00 Aug 08, 2006 page 494 of 982 REJ09B0054-0500 Table 14.5 Control Field for Locked Slave Unit Setting Value Bit 3 Bit 2 Bit 1 Bit 0 Function H'0 0 0 0 0 Reads slave status H'4 0 1 0 0 Reads locked address (upper 8 bits) H'5 0 1 0 1 Reads locked address (lower 4 bits) (1) Slave Status Read (Control Bits: H'0, H'6) The master unit can decide the reason the slave unit does not return the acknowledgement (ACK) by reading the slave status (H'0, H'6). The slave status indicates the result of the last communications that the slave unit performs. All slave units can provide slave status information. Figure 14.3 shows bit configuration of the slave status. MSB Bit 7 Notes: 1. Since this LSI can support up to mode 2, bits 6 and 7 are fixed to 10. 2. The value of bit 4 can be selected by the STE bit in the IEBus master unit address register 1 (IEAR1). 3. The slave receive buffer is a buffer which is accessed during data write (control bits: H'8, H'A, H'B, H'E, H'F). In this LSI, the slave receive buffer corresponds to the IEBus receive buffer register (IERBR); and bit 2 is the value of the RxRDY flag in the IEBus receive status register (IERSR). 4. The slave transmit buffer is a buffer which is accessed during data read (control bits: H'3, H'7). In this LSI, the slave transmit buffer corresponds to the IEBus transmit buffer register (IETBR) when SRQ = 1 in the IEBus general flag register (IEFLG); and bit 1 is a value which reverses the TxRDY flag in the IEBus transmit/runaway status register (IETSR). Bit 7, bit 6 Bit 5 Bit 3 Bit 2 Bit 4*2 Bit 1*3 Bit 0*4 00 01 10 11 Mode 0 Indicates the highest mode supported by a unit.*1 Mode 1 Mode 2 For future use Fixed 0 Fixed 0 Slave transmission halted Slave transmission enabled Slave receive buffer is empty Slave receive buffer is not empty Slave transmit buffer is empty Slave transmit buffer is not empty Unit is unlocked Unit is locked 0 0 0 0 1 1 1 1 0 0 Bit Value Description Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 LSB Figure 14.3 Bit Configuration of Slave Status (SSR) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |