H8SSLASH2225 datasheet(645/1071 Pages) RENESAS

645 / 1071 page

Section 15 Serial Communication Interface (SCI)

Rev. 5.00 Aug 08, 2006 page 559 of 982

REJ09B0054-0500

Bit

Bit Name

Initial

Value

R/W

Description

MPIE

R/W

Multiprocessor Interrupt Enable (enabled only

when the MP bit in SMR is 1 in asynchronous

mode)

When this bit is set to 1, receive data in which the

multiprocessor bit is 0 is skipped, and setting of the

RDRF, FER, and ORER status flags in SSR is

prohibited. On receiving data in which the

multiprocessor bit is 1, this bit is automatically

cleared and normal reception is resumed. For

details, refer to section 15.5, Multiprocessor

Communication Function.

When receive data including MPB = 0 is received,

receive data transfer from RSR to RDR, receive

error detection, and setting of the RERF, FER, and

ORER flags in SSR, are not performed.

When receive data including MPB = 1 is received,

the MPB bit in SSR is set to 1, the MPIE bit is

cleared to 0 automatically, and generation of RXI

and ERI interrupts (when the TIE and RIE bits in

SCR are set to 1) and FER and ORER flag setting

are enabled.

TEIE

R/W

Transmit End Interrupt Enable

This bit is set to 1, TEI interrupt request is enabled.

TEI cancellation can be performed by reading 1

from the DRE flag in SSR, then clearing it to 0 and

clearing the TEND flag to 0, or clearing the TEIE

bit to 0.

H8S/2225 数据表(PDF) 645 Page - Renesas Technology Corp

H8S/2225 数据表(HTML) 645 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载