FS401LF datasheet(103/104 Pages) ETC2

103 / 104 page

PRODUCT SPECIFICATION

FS401, FS403

REV. NO. 1.7

103

JANUARY 24, 2007

9. Revision History

3/3/99: First Release, V1.0

4/2/99: Second Release, V1.1: p. 1, added DPMS support & adaptive input filtering selection; p. 13,

added GPO0 description; p. 17, moved OHO & OVO to list of registers used by on-board processor; p.

19-24, corrected typo on register names & added better DSICAL description; p. 66, added reminder about

loop delay.

7/16/99: Third Release, V1.2: p. 10, 11, 16: documented need to ground “reserved” pins; p. 11 & 13,

EXADSEL sense changed from early silicon to high true input (high selects external A/D on FS403); p.

19-24, corrected typo on register names & added better DSICAL description, description of new SCR bits,

new HOHOS & HOVOS registers, SFLK change from register to bits in SCR; p. 26-27, new software

reset values and new HOHOS, HOVOS registers & SCR bits; p. 38, proper VGAINTDET definition; p. 53,

new SCR definitions; p. 55-57, new SSR, HCRS, and HCRES bit definitions; p. 58-63, HPO, VPO, HSS,

VSS, HPP, VPP all require up to 25ms (vs. 10ms) to calculate limits; ; p. 68-69, new HOHOS & HOVOS

registers definitions; p. 71-73, new Configuration Register definitions; p. 87, comment about Philips vs.

FOCUS SIO addressing added; p. 88, errors in table corrected (p. 15 was correct, not table 5); p. 103,

part number change.

9/2/99: Fourth Release, V1.3: p. 13, documented internal pull-down on EXADSEL; p. 14, corrected

CCOMP pull down; p. 96, deleted reference to FS_CKIN to FC_CKOUT resistor, resistor not recommended;

p. 103, package marking.

7/25/00: Fifth Release, V1.4: p. 1, new patent received; p. 5, corrected reference to external VGACKIN

source; p. 19 section 4.2.1.2, corrected first section regarding DSICAL bit (deleted reference to ICALRDY

bit); p. 25, Status Port changed to Status Register; p. 84, corrected oscillator settings for Super NTSC

and Super PAL; p. 91, 92: VREF changed to 1.276V typical, new min/max.

1/23/03: Sixth Release, V1.5: Table 2, corrected FS403 signal assignments on pin 24 (now G6) and pin

26 (now G4). Section 3, corrected descriptions of FS403 pin 24 (now G6) and pin 26 (now G4). Section

4.5.25, refined the definition of the GPO register.

11/27/05: Seventh Release, V1.6 Table 8.2 modified to include FS403LF dimensions. Removed

unreferenced rows in that table.

01/17/2007: Eight Release, V1.7. Leaded versions of FS401 and FS403 discontinued – removed all

references to leaded version of these parts . FS402 discontinued, all references to FS402 removed from

data sheet. Page 8, section 1.5.3 (FS402 application description) deleted. Page 52, removed reference

to FS402 in register 34 Description. Page 75, removed reference to FS402 in Figure 5 description. Page

85, clarification on last sentence in section 5.3.6. Page 101, removed reference to FS402 in section 8.1.

Page 102, removed reference to FS403 (leaded version), updated package drawing to eliminate

confusion on pin 1 location. Page 104, removed reference to parts 444-2121, 444-2122, 444-2123 (non

ROHS compliant parts), updated corporate contact information.

FS401LF 数据表(PDF) 103 Page - List of Unclassifed Manufacturers

FS401LF 数据表(HTML) 103 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载