| 数据搜索系统,热门电子元器件搜索 |
|
910GL 数据表(PDF) 69 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
910GL 数据表(HTML) 69 Page - Intel Corporation |
|
69 / 426 page ![]() Host Bridge/DRAM Controller Registers (D0:F0) R Datasheet 69 4.1.3 PCICMD—PCI Command (D0:F0) PCI Device: 0 Address Offset: 04h Default Value: 0006h Access: RO, R/W Size: 16 bits Since (G)MCH Device 0 does not physically reside on Primary PCI bus, many of the bits are not implemented. Bit Access & Default Description 15:10 Reserved 9 RO 0b Fast Back-to-Back Enable (FB2B). This bit controls whether or not the master can do fast back-to-back write. Since device 0 is strictly a target this bit is not implemented and is hardwired to 0. 8 R/W 0b SERR Enable (SERRE). This bit is a global enable bit for Device 0 SERR messaging. The (G)MCH does not have a SERR signal. The (G)MCH communicates the SERR condition by sending an SERR message over DMI to the ICH6. 1 = Enable. The (G)MCH is enabled to generate SERR messages over DMI for specific Device 0 error conditions that are individually enabled in the ERRCMD register. The error status is reported in the ERRSTS, and PCISTS registers. If SERRE is clear, then the SERR message is not generated by the (G)MCH for Device 0. 0 = Disable Note: That this bit only controls SERR messaging for the Device 0. Device 1 has its own SERRE bits to control error reporting for error conditions occurring in that device. The control bits are used in a logical OR manner to enable the SERR DMI message mechanism. 7 RO 0b Address/Data Stepping Enable (ADSTEP). Hardwired to 0. 6 RO 0b Parity Error Enable (PERRE). PERR# is not implemented by the (G)MCH and this bit is hardwired to 0. 5 RO 0b VGA Palette Snoop Enable (VGASNOOP). Hardwired to a 0. 4 RO 0b Memory Write and Invalidate Enable (MWIE). The (G)MCH will never issue memory write and invalidate commands. This bit is therefore hardwired to 0. 3 RO 0b Reserved 2 RO 1b Bus Master Enable (BME). The (G)MCH is always enabled as a master. This bit is hardwired to a "1". 1 RO 1b Memory Access Enable (MAE). The (G)MCH always allows access to main memory. This bit is not implemented and is hardwired to 1. 0 RO 0b I/O Access Enable (IOAE). Hardwired to a 0. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |