ST7LITE20F2 datasheet(93/166 Pages) STMICROELECTRONICS

93 / 166 page

ST7LITE20F2 ST7LITE25F2 ST7LITE29F2

On-chip peripherals

Doc ID 8349 Rev 5

93/166

Figure 43. Single master/ single slave application

Slave select management

As an alternative to using the SS pin to control the Slave Select signal, the application can

choose to manage the Slave Select signal by software. This is configured by the SSM bit in

the SPICSR register (see Figure 45: Hardware/software slave select management).

In software management, the external SS pin is free for other application uses and the

internal SS signal level is driven by writing to the SSI bit in the SPICSR register.

In Master mode:

SS internal must be held high continuously.

In Slave mode:

There are two cases depending on the data/clock timing relationship (see Figure 44):

If CPHA=1 (data latched on 2nd clock edge):

SS internal must be held low during the entire transmission. This implies that in single

slave applications the SS pin either can be tied to VSS, or made free for standard I/O by

managing the SS function by software (SSM= 1 and SSI=0 in the SPICSR register),

If CPHA=0 (data latched on 1st clock edge):

SS internal must be held low during byte transmission and pulled high between each

byte to allow the slave to write to the shift register. If SS is not pulled high, a Write

Collision error will occur when the slave writes to the shift register (see Write collision

error (WCOL)).

Figure 44. Generic SS timing diagram

8-BIT SHIFT REGISTER

SPI

CLOCK

GENERATOR

8-BIT SHIFT REGISTER

MISO

MOSI

MISO

SCK

SLAVE

MASTER

+5V

MSBit

LSBit

MSBit

LSBit

Not used if SS is managed

by software

Byte 1

Byte 2

Byte 3

MOSI/MISO

Master SS

Slave SS

(if CPHA=0)

Slave SS

(if CPHA=1)

ST7LITE20F2 数据表(PDF) 93 Page - STMicroelectronics

ST7LITE20F2 数据表(HTML) 93 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载