| 数据搜索系统,热门电子元器件搜索 |
|
STLUX385ATR 数据表(PDF) 70 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STLUX385ATR 数据表(HTML) 70 Page - STMicroelectronics |
|
70 / 99 page ![]() Electrical characteristics STLUX385A 70/98 DocID024387 Rev 2 10.2 Absolute maximum ratings Stresses above those listed as 'absolute maximum ratings' may cause permanent damage to the device. This is a stress rating only and functional operation of the device under these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect the device reliability. Table 32. Voltage characteristics Symbol Ratings Min. Max. Unit V DDX – V SSX Supply voltage (1) 1. All power V DDX (V DD , V DDA ) and ground V SSX (V SS , V SSA ) pins must always be connected to the external power supply. -0.3 6.5 V V IN Input voltage on any other pin (2) 2. I INJ(PIN) must never be exceeded. This is implicitly insured if V IN maximum is respected. If V IN maximum cannot be respected, the injection current must be limited externally to the I INJ(PIN) value. A positive injection is induced by V IN > V DD while a negative injection is induced by V IN < V SS . V SS -0.3 V DD +0.3 V DD - V DDA Variation between different power pins 50 mV V SS - V SSA Variation between all the different ground pins (3) 3. V SS and V SSA signals must be interconnected together with a short wire loop. 50 V ESD Electrostatic discharge voltage Refer to absolute maximum ratings (electrical sensitivity) on Section 10.4.1 Table 33. Current characteristics Symbol Ratings Max.(1) 1. Data based on characterization results, not tested in production. Unit I VDDX Total current into V DDX power lines (2) 2. All power V DDX (V DD , V DDA ) and ground V SSX (V SS , V SSA ) pins must always be connected to the external power supply. 100 mA I VSSX Total current out of V SSX power lines (2) 100 I IO Output current sunk by any I/Os and control pin Ref. Output current source by any I/Os and control pin I INJ(PIN) (3) (4) 3. I INJ(PIN) must never be exceeded. This is implicitly insured if V IN maximum is respected. If V IN maximum cannot be respected, the injection current must be limited externally to the I INJ(PIN) value. A positive injection is induced by V IN > V DD while a negative injection is induced by V IN < V SS . 4. Negative injection disturbs the analog performance of the device. Injected current on any pin ±4 I INJ(TOT) (3)(4)(5) 5. When several inputs are submitted to a current injection, the maximum Σ IINJ(PIN) is the absolute sum of the positive and negative injected currents (instantaneous values). These results are based on characterization with Σ IINJ(PIN) maximum current injection on four I/O port pins of the device. Sum of injected currents ±20 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |