| 数据搜索系统,热门电子元器件搜索 |
|
AR8327-AL1A-R 数据表(PDF) 49 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
AR8327-AL1A-R 数据表(HTML) 49 Page - List of Unclassifed Manufacturers |
|
49 / 394 page ![]() Atheros Communications, Inc. AR8327/AR8327N Seven-port Gigabit Ethernet Switch • 49 63 RESERVED 62 SA_DROP_EN Drop packet enable when source address is in this entry. If this bit is set to 1’b1, the packet with SA of this entry will be dropped. 61 MIRROR_EN 1 Indicates packets should be sent to mirror port and destination port. 0 Indicate packets should only be sent to destination port 60 PRI_EN Priority override enable. 1: Indicates PRIORITY (ATU[58:56]) can override any other priority determined by the frame’s data. 59 SVL_ENTRY 1’b1: SVL learned 1’b0: IVL learned 58:56 PRIORITY The priority bits may be used as the frame’s priority when “PRI_OVER_EN” (bit[60]) is set to one. 55 CROSS_PORT_STATE _EN 1’b1: Cross port state enable 1’b0: Cross port state disable 54:48 DES_PORT Indicate which ports are associated with this MAC address when they are set to one. Bit [48] is assigned to port0, bit [49] to port1, bit [50] to port3, and so on. If all bits are set to zero and the entry is static, the packet should be dropped. For multicast address and unicast for link aggregation, more than one bit is set to one. 47:0 ADDRESS 48-bit MAC address Table 2-32. Bit Name Description Table 2-33. RESERVED ATU Entry Bit Name Description 64 STATUS 1’b1: static and valid 1’b0: invalid 63 COPY_TO_CPU 1’b1: packet received with the address should be copied to the CPU port 62 REDIRECT_TO_CPU 1’b1: packet received with this address should be redirected to the CPU port. If no CPU is connected to the switch, the packet will be dropped. 61 LEAKY_EN 1’b1: use leaky VLAN enable for this MAC address This bit can be used for unicast and multicast frames, controlled by ARL_uni_leaky_en and ARL_multi_leaky_en 60 MIRROR_EN 1’b1: indicates packets should be sent to the mirror port and the destination port 1’b0: indicates packets should be sent only to the destination port 59 PRI_OVER_EN Priority override enable 1’b1: indicate PRIORITY (ATU[58:56]) can override any other priority determined by the frame’s data 58:56 PRI This priority bit may be used as a frame’s priority when PRI_OVER_EN is set to one 55 CROSS_PORT_STATE _EN 1’b1: cross port state enabled |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |