| 数据搜索系统,热门电子元器件搜索 |
|
DS31256 数据表(PDF) 48 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
DS31256 数据表(HTML) 48 Page - Maxim Integrated Products |
|
48 / 183 page ![]() DS31256 256-Channel, High-Throughput HDLC Controller 48 of 183 6.2 Port Register Descriptions Receive-Side Control Bits (one each for all 16 ports) Register Name: RP[n]CR, where n = 0 to 15 for each port Register Description: Receive Port [n] Control Register Register Address: See the Register Map in Section 4. Bit # 7 6 5 4 3 2 1 0 Name RSS1 RSS0 RSD1 RSD0 VRST RISE RIDE RICE Default 0 0 0 0 0 0 0 0 Bit # 15 14 13 12 11 10 9 8 Name RCOFA IERC VLB VTO n/a LLB RUEN RP[i]HS Default 0 0 0 0 0 0 0 0 Note: Bits that are underlined are read-only; all other bits are read-write. Bit 0/Invert Clock Enable (RICE) 0 = do not invert clock (normal mode) 1 = invert clock (inverted clock mode) Bit 1/Invert Data Enable (RIDE) 0 = do not invert data (normal mode) 1 = invert data (inverted data mode) Bit 2/Invert Sync Enable (RISE) 0 = do not invert sync pulse (normal mode) 1 = invert sync pulse (inverted sync pulse mode) Bit 3/V.54 Detector Reset (VRST). Toggling this bit from 0 to 1 and then back to 0 causes the internal V.54 detector to be reset and begin searching for the V.54 loop-up pattern. See Section 6.4 for more details. Bit 4/Sync Delay Bit 0 (RSD0); Bit 5/Sync Delay Bit 1 (RSD1). These two bits define the format of the sync signal that is applied to the RS[n] input. These bits are ignored if the port has been configured to operate in an unchannelized fashion (RUEN = 1). 00 = sync pulse is 0 clocks early 01 = sync pulse is 1/2 clock early 10 = sync pulse is 1 clock early 11 = sync pulse is 2 clocks early Bit 6/Sync Select Bit 0 (RSS0); Bit 7/Sync Select Bit 1 (RSS1). These two bits select the mode in which each port is to be operated. Each port can be configured to accept 24, 32, 64, or 128 DS0 channels at an 8kHz rate. These bits are ignored if the port has been configured to operate in an unchannelized fashion (RUEN = 1). 00 = T1 Mode (24 DS0 channels and 193 RC clocks between RS sync signals) 01 = E1 Mode (32 DS0 channels and 256 RC clocks between RS sync signals) 10 = 4.096MHz Mode (64 DS0 channels and 512 RC clocks between RS sync signals) 11 = 8.192MHz Mode (128 DS0 channels and 1024 RC clocks between RS sync signals) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |