| 数据搜索系统,热门电子元器件搜索 |
|
CS5535 数据表(PDF) 500 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
CS5535 数据表(HTML) 500 Page - National Semiconductor (TI) |
|
500 / 555 page ![]() www.national.com 500 Revision 0.8 PMC Register Descriptions (Continued) 15:13 RSVD Reserved. Reads return 0; writes are don’t care. 12 BADPACK_ RST_FLAG Bad Packet Reset Flag. If set, indicates that the last Standby state was entered from bad packet type reset. Returns to Working state when Abnormal Work Delay expires. (Note 1) 11 GLCP_SFT_ RST_FLAG GLCP Soft Reset Flag. If set, indicates that the last Standby state was entered from a GLCP soft reset. Returns to Working State when Abnormal Work Delay expires. (Note 1) 10 WATCHDOG_ RST_FLAG Watchdog Reset Flag. If set, indicates that the last Standby state was entered from a Watchdog reset. Returns to Working state when Abnormal Work Delay expires. (Note 1) 9 SHTDWN_RST_ FLAG Shutdown Reset Flag. If set, indicates that the last Standby state was entered from shutdown reset. Returns to Working state when Abnormal Work Delay expires. (Note 1) 8SFT_RST_ FLAG Soft Reset Flag. If set, indicates that the last Standby state was entered from a soft- ware reset. Returns to Working state when Abnormal Work Delay expires. (Note 1) 7 RSVD Reserved. Reads return 0; writes are don’t care. 6 HRD_RST_FLAG Hard Reset Flag. If set, indicates that the last Standby state was entered due to the unexpected assertion of Working reset. Returns to Working state when hard reset is de-asserted and Abnormal Work Delay expires. (Note 1) 5 LOWBAT_FLAG Low Battery Flag. If set, indicates that the last Standby state was entered due to a low power shutdown. Returns to Working state due to default wakeup. (Note 1) 4THRM_FLAG Thermal Flag. If set, indicates that the last Standby state was entered due to a thermal shutdown. Returns to Working state due to default wakeup. (Note 1) 3PWRBTN_FLAG Power Button Flag. If set, indicates that the last Standby state was entered via a fail- safe power off sequence. User held down the power button. PM1_CNT was not used. Returns to Working state due to default wakeup. (Note 1) 2 LVD_FLAG Working Power Fail. If set, indicates that the last Standby state was entered via an unexpected loss of Working power as detected with the on-chip Low Voltage Detect cir- cuit. Returns to Working state due to default wakeup. (Note 1) 1NORM_FLAG Normal Flag. If set, indicates that the last Standby state was entered under program control through use of PM1_CNT. Returns to Working state due to programmed wakeup. See PM1_STS (ACPI I/O Offset 00h) and PM_GPE0_STS (ACPI I/O Offset 18h) for wakeup source. (Note 1) 0 OFF_FLAG Off Flag (No Previous). If set, indicates that the circuits of the Standby power domain have been reset. Entry was from the Power Off state. Returns to Working state due to default wakeup. (Note 1) Note 1. Standby Status. These bits are cleared each time the Power Management Logic enters the Standby state except for the bit that caused the entry. Write 1 to the bit to clear the bit; writing 0 has no effect. Bits [12:8,6] do not result in WORKING or WORK_AUX being de-asserted. PM_SSC Bit Descriptions (Continued) Bit Name Description |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |