LPC2917 datasheet(44/68 Pages) PHILIPS

44 / 68 page

LPC2917_19_1

Preliminary data sheet

Rev. 1.01 — 15 November 2007

44 of 68

NXP Semiconductors

LPC2917/19

ARM9 microcontroller with CAN and LIN

Any output generator (except for BASE_SAFE_CLK and BASE_PCR_CLK) can be

connected to either a fractional divider (FDIV0..6) or to one of the outputs of the PLL or to

LP_OSC/crystal oscillator directly. BASE_SAFE_CLK and BASE_PCR_CLK can use only

LP_OSC as source.

The fractional dividers can be connected to one of the outputs of the PLL or directly to

LP_OSC/crystal Oscillator.

The PLL can be connected to the crystal oscillator.

In this way every output generating the base clocks can be configured to get the required

clock. Multiple output generators can be connected to the same primary or secondary

clock source, and multiple secondary clock sources can be connected to the same PLL

output or primary clock source.

Invalid selections/programming - connecting the PLL to an FDIV or to one of the PLL

outputs itself for example - will be blocked by hardware. The control register will not be

written, the previous value will be kept, although all other fields will be written with new

data. This prevents clocks being blocked by incorrect programming.

Default Clock Sources: Every secondary clock generator or output generator is

connected to LP_OSC at reset. In this way the device runs at a low frequency after reset.

It is recommended to switch BASE_SYS_CLK to a high-frequency clock generator as

(one of) the first step(s) in the boot code after verifying that the high-frequency clock

generator is running.

Fig 13. Structure of the clock generation scheme

PLL160M

FDIV0..6

XO50M

OSC1M

Clock

outputs

clkout /

clkout120 /

clkout240

Output

Control

LPC2917 数据表(PDF) 44 Page - NXP Semiconductors

LPC2917 数据表(HTML) 44 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

数据表下载