R8CSLASH2G datasheet(6/344 Pages) RENESAS

6 / 344 page

The symbols and terms used in register diagrams are described below.

Blank: Set to 0 or 1 according to the application.

0: Set to 0.

1: Set to 1.

X: Nothing is assigned.

RW: Read and write.

RO: Read only.

WO: Write only.

−: Nothing is assigned.

• Reserved bit

Reserved bit. Set to specified value.

• Nothing is assigned

Nothing is assigned to the bit. As the bit may be used for future functions, if necessary, set to 0.

• Do not set to a value

Operation is not guaranteed when a value is set.

• Function varies according to the operating mode.

The function of the bit varies with the peripheral function mode. Refer to the register diagram for information

on the individual modes.

XXX Register

Symbol

Address

After Reset

XXX

00h

Bit Name

Bit Symbol

XXX bits

1 0: XXX

0 1: XXX

1 0: Do not set.

1 1: XXX

b1 b0

XXX1

XXX0

XXX4

Reserved bits

XXX5

XXX7

XXX6

Function

Nothing is assigned. If necessary, set to 0.

When read, the content is undefined.

XXX bit

Function varies according to the operating

mode.

Set to 0.

(b3)

(b2)

XXX bits

0: XXX

1: XXX

R8C/2G 数据表(PDF) 6 Page - Renesas Technology Corp

R8C/2G 数据表(HTML) 6 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载