数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

R8C/2G 数据表(PDF) 282 Page - Renesas Technology Corp

部件名 R8C/2G
功能描述  RENESAS MCU R8C FAMILY / R8C/2x SERIES
PDF  344 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  RENESAS [Renesas Technology Corp]
网页  http://www.renesas.com
标志 RENESAS - Renesas Technology Corp

R8C/2G 数据表(HTML) 282 Page - Renesas Technology Corp

Back Button R8C/2G Datasheet HTML 278Page - Renesas Technology Corp R8C/2G Datasheet HTML 279Page - Renesas Technology Corp R8C/2G Datasheet HTML 280Page - Renesas Technology Corp R8C/2G Datasheet HTML 281Page - Renesas Technology Corp R8C/2G Datasheet HTML 282Page - Renesas Technology Corp R8C/2G Datasheet HTML 283Page - Renesas Technology Corp R8C/2G Datasheet HTML 284Page - Renesas Technology Corp R8C/2G Datasheet HTML 285Page - Renesas Technology Corp R8C/2G Datasheet HTML 286Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 282 / 344 page
background image
R8C/2G Group
20. Flash Memory
Rev.1.00
Apr 04, 2008
Page 262 of 318
REJ09B0387-0100
20.4.4.1
Software Commands
There are four types of software commands:
• Read array
• Clear status register
• Program
• Block erase
Do not execute read status register command in EW1 mode.
Figure 20.13 shows Software Command Status Transition Diagram in EW1 Mode.
Figure 20.13
Software Command Status Transition Diagram in EW1 Mode
• Read Array Command
The read array command reads the flash memory.
When FFh is written to an address in the user ROM area, the MCU enters read array mode. In this mode,
the contents of the specified address can be read.
Read array mode continues until other commands are written. The MCU enters this mode after a reset is
deasserted.
• Clear Status Register Command
The clear status register command sets the status register to 0.
When 50h is written to an address in the user ROM area, bits FMR07 and FMR06 in the FMR0 register and
bits SR5 and SR4 in the status register are set to 00b.
Read array mode
(FMR46 = 1 Reading enabled)
Program
Block erase
Clear status
register
Auto-erasure
completed
Write 1 to the FMR01 bit immediately after writing 0, and
write 1 to the FMR11 bit immediately after writing 0.
FMR01 = 0
Read array mode
(FMR46 = 1 Reading enabled)
No command required
Reading only available
Auto-programming
completed
50h
(Clear status
register
command)
20h
(Block erase
command)
40h
(Program command)
Write data
(Programming starts)
FFh
(Read array
command)
D0h
(Block erasure starts)
CPU stops
Auto-erase
(FMR46 = 0 Reading disabled)
Auto-program
(FMR46 = 0 Reading disabled)
Clear ends
CPU rewrite mode (EW1 mode)
Reset
CPU rewrite disabled



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com