R8CSLASH2G datasheet(296/344 Pages) RENESAS

296 / 344 page

R8C/2G Group

22. Electrical Characteristics

Rev.1.00

Apr 04, 2008

Page 276 of 318

REJ09B0387-0100

NOTES:

1. VCC = 2.7 to 5.5 V at Topr = 0 to 60

°C, unless otherwise specified.

2. Definition of programming/erasure endurance

The programming and erasure endurance is defined on a per-block basis.

If the programming and erasure endurance is n (n = 100 or 10,000), each block can be erased n times. For example, if 1,024

1-byte writes are performed to block A, a 1 Kbyte block, and then the block is erased, the programming/erasure endurance

still stands at one.

However, the same address must not be programmed more than once per erase operation (overwriting prohibited).

3. Endurance to guarantee all electrical characteristics after program and erase. (1 to Min. value can be guaranteed).

4. In a system that executes multiple programming operations, the actual erasure count can be reduced by writing to sequential

addresses in turn so that as much of the block as possible is used up before performing an erase operation. For example,

when programming groups of 16 bytes, the effective number of rewrites can be minimized by programming up to 128 groups

before erasing them all in one operation. It is also advisable to retain data on the erase count of each block and limit the

number of erase operations to a certain number.

5. If an error occurs during block erase, attempt to execute the clear status register command, then execute the block erase

command at least three times until the erase error does not occur.

6. Customers desiring program/erase failure rate information should contact their Renesas technical support representative.

7. The data hold time includes time that the power supply is off or the clock is not supplied.

Table 22.3

Flash Memory (Program ROM) Electrical Characteristics

Symbol

Parameter

Conditions

Standard

Unit

Min.

Typ.

Max.

−

Program/erase endurance(2)

100(3)

−−

times

−

Byte program time

−

400

µs

−

Block erase time

−

0.4

−

Program, erase voltage

2.7

−

5.5

−

Read voltage

2.2

−

5.5

−

Program, erase temperature

−

°C

−

Data hold time(7)

Ambient temperature = 55

°C20

−−

year

R8C/2G 数据表(PDF) 296 Page - Renesas Technology Corp

R8C/2G 数据表(HTML) 296 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载