H8SSLASH2225 datasheet(179/1071 Pages) RENESAS

179 / 1071 page

Section 2 CPU

Rev. 5.00 Aug 08, 2006 page 93 of 982

REJ09B0054-0500

2.7.8

Memory Indirect—@@aa:8

This mode can be used by the JMP and JSR instructions. The instruction code contains an 8-bit

absolute address specifying a memory operand. This memory operand contains a branch address.

The upper bits of the absolute address are all assumed to be 0, so the address range is 0 to 255

(H'0000 to H'00FF in normal mode*, H'000000 to H'0000FF in advanced mode). In normal mode,

the memory operand is a word operand and the branch address is 16 bits long. In advanced mode,

the memory operand is a longword operand, the first byte of which is assumed to be 0 (H'00).

Note that the first part of the address range is also the exception vector area. For further details,

refer to section 4, Exception Handling.

If an odd address is specified in word or longword memory access, or as a branch address, the

least significant bit is regarded as 0, causing data to be accessed or instruction code to be fetched

at the address preceding the specified address (For further information, see section 2.5.2, Memory

Data Formats).

Note: * Normal mode is not available in this LSI.

Specified

by @aa:8

Specified

by @aa:8

Branch address

Reserved

(a) Normal Mode*

(a) Advanced Mode

Note: * Normal mode is not available in this LSI.

Figure 2.12 Branch Address Specification in Memory Indirect Mode

H8S/2225 数据表(PDF) 179 Page - Renesas Technology Corp