| 数据搜索系统,热门电子元器件搜索 |
|
H8S/2225 数据表(PDF) 189 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/2225 数据表(HTML) 189 Page - Renesas Technology Corp |
|
189 / 1071 page ![]() Section 3 MCU Operating Modes Rev. 5.00 Aug 08, 2006 page 103 of 982 REJ09B0054-0500 Section 3 MCU Operating Modes 3.1 Operating Mode Selection The LSI supports four operating modes (modes 7 to 4). These operating modes are used to switch the pin functions. The operating mode is determined by the setting of the mode pins (MD2 to MD0). Modes 6 to 4 are external extended modes used to access external memory or peripheral devices. In the external extended modes each area can be specified as an 8-bit or 16-bit address space using the bus controller after program execution starts. In addition, the 16-bit bus mode is used if any of the areas is configured as 16-bit address space. The 8-bit bus mode is used if all areas are configured as 8-bit address space. Mode 7 does not use external address space. Do not change the mode pin setting during operation. Table 3.1 MCU Operating Mode Selection External Data Bus MCU Operating Mode MD2 MD1 MD0 CPU Operating Mode Description On-chip ROM Initial Value Maximum Value 4 100Advanced mode On-chip ROM disabled, extended mode Disabled 16 bits 16 bits 5 101Advanced mode On-chip ROM disabled, extended mode Disabled 8 bits 16 bits 6 110Advanced mode On-chip ROM enabled, extended mode Enabled 8 bits 16 bits 7 111Advanced mode Single-chip mode Enabled — — |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |