| 数据搜索系统,热门电子元器件搜索 |
|
AM79C978VC/W 数据表(PDF) 148 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
AM79C978VC/W 数据表(HTML) 148 Page - Advanced Micro Devices |
|
148 / 261 page ![]() 148 Am79C978 be driven to a LOW level whenev- er the OR of the enabled signals is true, and the LED pin will be disabled and allowed to float high whenever the OR of the enabled signals is false (i.e., the LED out- put will be an Open Drain output and the output value will be the inverse of the LEDOUT status bit). When this bit has the value 1, then the LED pin will be driven to a HIGH level whenever the OR of the enabled signals is true, and the LED pin will be driven to a LOW level whenever the OR of the enabled signals is false (i.e., the LED output will be a Totem Pole output and the output value will be the same polarity as the LEDOUT status bit.). The setting of this bit will not ef- fect the polarity of the LEDOUT bit for this register. This bit is always read/write ac- cessible. LEDPOL is cleared by H_RESET and is not affected by S_RESET or setting the STOP bit. 13 LEDDIS LED Disable. This bit is used to disable the LED output. When LEDDIS has the value 1, then the LED output will always be dis- abled. When LEDDIS has the val- ue 0, then the LED output value will be governed by the LEDOUT and LEDPOL values. This bit is always read/write ac- cessible. LEDDIS is cleared by H_RESET and is not affected by S_RESET or setting the STOP bit. 12 100E 100 Mbps Enable. When this bit is set to 1, a value of 1 is passed to the LEDOUT bit in this register when the Am79C978 controller is operating at 100 Mbps mode. This bit is always read/write ac- cessible. 100E is cleared by H_RESET and is not affected by S_RESET or setting the STOP bit. 11-10 RES Reserved locations. Written and read as zeros. 9 MPSE Magic Packet Status Enable. When this bit is set to 1, a value of 1 is passed to the LEDOUT bit in this register when Magic Packet frame mode is enabled and a Magic Packet frame is detected on the network. This bit is always read/write ac- cessible. MPSE is cleared by H_RESET and is not affected by S_RESET or setting the STOP bit. 8 FDLSE Full-Duplex Link Status Enable. Indicates the Full-Duplex Link Test Status. When this bit is set, a value of 1 is passed to the LED- OUT signal when the Am79C978 controller is functioning in a Link Pass state and full-duplex opera- tion is enabled. When the Am79C978 controller is not func- tioning in a Link Pass state with full-duplex operation being en- abled, a value of 0 is passed to the LEDOUT signal. This bit is always read/write ac- cessible. FDLSE is cleared by H_RESET and is not affected by S_RESET or setting the STOP bit. 7 PSE Pulse Stretcher Enable. When this bit is set, the LED illumination time is extended for each new oc- currence of the enabled function for this LED output. A value of 0 disables the pulse stretcher. This bit is always read/write ac- cessible. PSE is set to 1 by H_RESET and is not affected by S_RESET or setting the STOP bit. 6 LNKSE Link Status Enable. When this bit is set, a value of 1 will be passed to the LEDOUT bit in this register when in Link Pass state. This bit is always read/write ac- cessible. LNKSE is set to 1 by H_RESET and is not affected by |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |